DIN 1725-1 Grade 3.3535 H1x: Premium Corrosion-Resistant Magnesium Alloy

The alloy is characterised by a good corrosion resistance. It is sea water steady and resistant to saline atmosphere. The Mg content increases the strength, but the cold forming capacity decreases. The material is nature hard, i.e. only by a cold forming and not by a purposeful heat treatment a strength increase can be attained. It is well polishable and anodisable. The splinter-giving machinability becomes better with increasing Mg content, just as the weldability. The material is used for statically loaded construction units. It is of this type of alloy the material most common used in the technology. For decorative anodising must be proceeded from the anodising quality AlMg3EQ. Application: In the apparatus engineering for pressure and compressed gas according to AD-W6/1 and VdTUEV-Werkstoffblaetter, for tanks for very low-temperatures, for heat exchangers. In the building industry for claddings, roofings, windows, doors and window walls, fittings as well as for carrying constructions according to DIN 4113. In the automobile engineering for commercial motor vehicle superstructures (sheet metal), for silo and tank trucks as well as body parts. For diaphragm disks of brake boosters, in the aircraft construction, in the building of forms predominantly for tools and devices as base, head and stamp plates as well as guide plates. For metal goods (incl. table-ware) and metal-describe, in food industry (including commercial devices), in the building of rail-mounted vehicles for equipments, in mechanical engineering for machine bodys, for housings. In shipbuilding for trunk and superstructures and equipment. For transport container (rolling barrel, large bottles to 10 l, liquid container up to 1 cubic meter in galvanized steel rack). For packing (doses, dose cover, valve disk for aerosol doses and bottle caps), for furniture (incl. camping furniture) and for joining elements (solid rivets, blind rivets, riveting nuts and screws) as well as for flexible pipes.

Quantity: One truck load – Specialty products on request.Additional services: Via Cindal (the Aludium R&D department): R&D services, benchmarking, chemical audits, material specification, process optimisation, quality monitoring, sample analysis, prototyping, training

Properties

General

Property	Temperature	Value	Condition	Related Standards	Shape
Density	20.0 °C	2.66 g/cm³	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat

Mechanical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Elastic modulus	20.0 °C	68.0 - 72.0 GPa	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Plane-Strain Fracture Toughnes		22.0 - 35.0 MPa·√m				Typical for Wrought 5000 Series Aluminium
Poisson's ratio		0.33 [-]				Typical for Wrought 5000 Series Aluminium
Shear modulus	20.0 °C	27.0 GPa	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Tensile strength	20.0 °C	320.0 MPa	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat

Thermal

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Coefficient of thermal expansion	100.0 °C	2.39e-05 1/K	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Max service temperature		150.0 °C				Typical for Wrought 5000 Series Aluminium
Melting point		560.0 - 655.0 °C				Typical for Wrought 5000 Series Aluminium
Specific heat capacity	20.0 °C	963.0 J/(kg·K)	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Thermal conductivity	20.0 °C	140.0 - 160.0 W/(m·K)	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat

Electrical

Property	Temperature	Value	Condition	Related Standards	Shape	Comment
Electrical conductivity	20.0 °C	20000000.0 - 23000000.0 S/m	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Electrical resistivity		3.3e-08 - 5e-08 Ω·m				Typical for Wrought 5000 Series Aluminium

Chemical properties

Property	Value	Condition	Related Standards	Shape
Chromium	0.3	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Copper	0.1	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Iron	0.4	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Magnesium	2.6 - 3.6 %	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Manganese	0.5	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Silicon	0.4	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Titanium	0.15	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat
Zinc	0.2	H1x	DIN 1725-1, EN 573-3, EN 573-4	Flat

Technological properties

Property
Workability	Good workability.