EN 10209 DC06ED Cold‑Rolled Low‑Carbon Steel – Skin‑Passed Grade for Enamel Applications
Cold rolled low carbon steel for flat products for vitreous enamelling (direct enamelling, as well as for special applications of conventional two coat enamelling for better sag resistance). Application: domestic appliances (cooking, laundry), sanitary ware (bathtubs, shower trays, sinks), architectural panels (interior and exterior), signage
Properties
General
| Property | Value | Comment |
|---|---|---|
Density | 7.8 - 7.9 g/cm³ | Typical for Low Carbon Steel |
Mechanical
| Property | Temperature | Value | Condition | Related Standards | Shape | Comment |
|---|---|---|---|---|---|---|
Elastic modulus | 200 - 215 GPa | Typical for Low Carbon Steel | ||||
Poisson's ratio | 0.29 [-] | Typical for Low Carbon Steel | ||||
Shear modulus | 82 GPa | Typical for Low Carbon Steel | ||||
Tensile strength | 20 °C | 270 - 350 MPa | cold rolled, skin passed | EN 10209 | Sheet | Transverse |
20 °C | 270 - 350 MPa | cold rolled, skin passed | EN 10209 | Strip, Bar | ||
Yield strength | 20 °C | 120 - 230 MPa | cold rolled, skin passed | EN 10209 | Sheet | Transverse |
20 °C | 120 - 210 MPa | cold rolled, skin passed | EN 10209 | Sheet | Transverse | |
20 °C | 120 - 190 MPa | cold rolled, skin passed | EN 10209 | Sheet | Transverse | |
20 °C | 120 - 190 MPa | cold rolled, skin passed | EN 10209 | Strip, Bar |
Thermal
| Property | Value | Comment |
|---|---|---|
Coefficient of thermal expansion | 1.32e-05 - 1.38e-05 1/K | Typical for Low Carbon Steel |
Max service temperature | 500 °C | Typical for Carbon Steel |
Melting point | 1480 - 1526 °C | Typical for Low Carbon Steel |
Specific heat capacity | 465 J/(kg·K) | Typical for Low Carbon Steel |
Thermal conductivity | 25 - 93 W/(m·K) | Typical for Low Carbon Steel |
Electrical
| Property | Value | Comment |
|---|---|---|
Electrical resistivity | 1.43e-07 - 1.74e-07 Ω·m | Typical for Carbon Steel |
Magnetic
| Property | Value | Comment |
|---|---|---|
Curie temperature | 770 °C | Typical for Low Carbon Steel |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Carbon | 0.02 | cold rolled, skin passed | EN 10209 | Sheet |
Manganese | 0.35 | cold rolled, skin passed | EN 10209 | Sheet |
Phosphorus | 0.02 | cold rolled, skin passed | EN 10209 | Sheet |
Sulfur | 0.05 | cold rolled, skin passed | EN 10209 | Sheet |
Titanium | 0.3 | cold rolled, skin passed | EN 10209 | Sheet |
Metal
- EN 10139 Grade RRSt 3 – Cold‑Rolled, Skin‑Passed Steel for High‑Performance Tooling
- EN 10139 Grade St 2 Cold Rolled Steel – Skin-Passed, High Strength & Weldable
- EN 10139 St. 2 Cold‑Rolled, Skin‑Passed Steel (K32) – Superior Strength & Weldability
- EN 10139 Grade St 4 Cold-Rolled, Skin-Passed Steel (K32) – High Strength & Formability
- EN 10139 Grade USt 3: Cold‑Rolled, Skin‑Passed Steel for High‑Performance Applications
- EN 10139 DC05 Cold Rolled Low‑Carbon Steel – Skin Pass Grade
- EN 10139 Grade DC01 Cold-Rolled Steel – Skin-Passed, Ideal for Precision Cold Forming
- EN 10209 DC03ED: Cold-Rolled, Skin-Passed Low-Carbon Steel for Enamel Applications
- EN 10139 Grade DC06 Cold Rolled Low-Carbon Steel – Skin Passed
- EN 10209 DC04ED: Premium Cold‑Rolled Low‑Carbon Steel, Skin‑Passed for Enamel Applications