If you were to take apart any electronic device that contains a circuit board, you’ll see the components are attached using soldering techniques. Soldering is the process of joining two or more electronic parts together by melting solder around the connection. Even though soldering can create a

What is Arc Welding? Arc welding is a welding process used to join metal to metal by using electricity to generate enough heat to melt metal and the melted metals, when cooled, resulting in a joint of the metals. It is a type of welding that uses a welding power supply to create an arc betwe

What is MIG Welding? Metal Inert Gas (MIG) welding is an arc welding process that uses a continuous solid wire electrode heated and fed into the weld pool from a welding gun. The two base materials are melted together forming a join. The gun feeds a shielding gas alongside the electrode help

What Is Additive Manufacturing? Additive manufacturing (AM), also known as 3D printing, is a transformative approach to industrial production that enables the creation of lighter, stronger parts and systems. As its name implies, additive manufacturing adds material to create an object. Ad

What is Plasma cutting? Plasma cutting is a melting process in which a jet of ionized gas at temperatures above 20,000°C is used to melt and expel material from the cut. This heat melts the metal and the gas flow ejects it from the cut. Plasma gases are usually argon, argon/hydrogen, or nitr

What is Rapid Prototyping? Rapid prototyping is the fast fabrication of a physical part, model, or assembly using 3D computer-aided design (CAD). The creation of the part, model, or assembly is usually completed using additive manufacturing, more commonly known as 3D printing. Rapid proto

What Is Oxy-Acetylene Welding? Oxy-acetylene welding commonly referred to as gas welding, is a process that relies on the combustion of oxygen and acetylene. When mixed together in correct proportions within a hand-held torch or blowpipe, a relatively hot flame is produced with a temperatur

What is 3D Printing? 3D printing or additive manufacturing is the construction of a three-dimensional object from a CAD model or a 3D digital model. The term “3D printing” can refer to a variety of processes in which material is deposited, joined, or solidified under computer control into

What Is Gas Tungsten Arc Welding? Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding, is an arc welding process that uses a non-consumable tungsten electrode to produce the weld. The weld area and electrode are protected from oxidation or other atmospheric contam

What Is Laser Beam Machining? Laser beam machining (LBM) is a form of machining that uses heat directed from a laser beam. This process uses thermal energy to remove material from metallic or nonmetallic surfaces. The high frequency of monochromatic light will fall on the surface then heatin

What is Thermosetting Plastic? Thermosetting plastic is a polymer that irreversibly becomes rigid when heated. Such a material is also known as a thermoset or thermosetting polymer. Initially, the polymer is a liquid or soft solid. Heat provides energy for chemical reactions that increase th

What is Slotting Machine? Slotting machines are reciprocating machines that are mainly used to manufacture horizontal, vertical, or flat surfaces. The slotting machine is mainly used for cutting planes, forming surfaces and keyways, etc., and is suitable for single or small batch production.

What is a Lathe? A lathe is a machine tool that rotates a workpiece around an axis of rotation to perform various operations such as cutting, grinding, knurling, drilling, deforming, facing, and turning with tools applied to the workpiece to create an object with symmetry around this axis.

Milling machines are among the most commonly used machine tools in modern manufacturing. You’ll find them in everything from major assembly lines to small tool-and-die shops, and just about anywhere in between. Just about every industry uses milling machines, from mini-mills in high-end scienti

The lathe is a machine tool that uses a cutting tool to remove material from the surface of the workpiece which is placed in the chuck to hold the workpiece and feed to the workpiece was provided by the tool to remove the material. It is the most versatile and widely used machine in industries,

Milling machines facilitate in removal of metal pieces through a rotating cutter. The rotation of the cutter takes place at high speed, which helps it cut through metal efficiently. Furthermore, these cutters have cutting edges that play a vital role in cutting materials. These types of presses

Lathe Machine Operations A lathe is a machine that rotates the piece on the axis in order to perform various operations like cutting, facing, knurling, deformation, and more. Metal spinning, thermal spraying, woodturning, and metalworking are the common operations performed with a lathe mach

What is Welding? Welding is a fabrication process that uses heat, pressure, or both to fuse two or more parts together, forming a joint as the parts cool. Welding is typically used on metals and thermoplastics, but can also be used on wood. The completed welded joint can be referred to as a

Welding is a complex craft that requires patience, attention to detail, and creativity. To do their job successfully, welders must have a deep understanding of the various techniques and practices used in the industry, including the types of welded joints. The term “weld joint design” refers

What Is Powder Metallurgy? Powder metallurgy is a term covering a wide range of ways in which materials or components are made from metal powders. This process can avoid, or greatly reduce, the need to use metal removal processes, thereby drastically reducing yield losses in manufacture and