CNC Programming: Chamfer & Radius Using G01 G-Code
CNC programming example code to demonstrate, how to program a Chamfer and Radius (Corner Rounding) with G01 G-code.
Easy to program and understand that even a beginner level CNC machinist can understand and program such sample codes.
Mostly works on Fanuc and similar CNC controls.
No extra G-code or technique is required. Just have to put a “C” for chamfer and an “R” for Radius in a cnc program block with G01 G-code. Chamfer is at 45° (45 degrees).
For a brief description of how Chamfer and Corner Radius are programmed with G01 G code read following cnc programming article Chamfer and Radius Programming with G01 G code.
Another such program example is here G01 Chamfer and Corner Rounding a CNC Program Example
Chamfer and Radius with G01 G-Code
Chamfer and Radius Program Example with G01
N40 G01 X26 Z53 N50 G01 X26 Z27 R6 N60 G01 X86 Z27 C3 N70 G01 X86 Z0
CNC Machine
- Fanuc CNC Programming Guide: A Simple, Feature‑Rich Example
- Mastering G01: Chamfer & Corner Rounding in CNC Programming
- Mastering Chamfer and Radius Programming with G01 Code
- Master G81 Drilling Cycle with G91 Incremental Mode: Step-by-Step Example Program
- Master Sinumerik 810 CNC Mill Radius & Chamfer Programming – Step‑by‑Step Example
- Haas CNC Programming: Corner Rounding & Chamfering Using G01 C & R
- CNC Lathe Programming: Simple Contour Turning with Radius Example
- CNC Lathe Programming: Arc Radius Example Using G02 & G03 Codes
- Haas Corner Rounding & Chamfering Program Example – Step‑by‑Step CNC Workflow
- CNC Outside Turning with Radius: Step‑by‑Step Program Example