EN 10088-1 Grade X2CrNbZr17 Soft Annealed Steel (+A) – Superior Corrosion & Heat Resistance
The zircon-alloyed patented steel X2CrNbZr17 is used as cold rolled strip. It shows resistance to intercrystalline corrosion both in delivery and welded condition. The material may be used as heat-resistant steel acc. to DIN EN 10095 : 1999-05.
Properties
General
| Property | Temperature | Value |
|---|---|---|
Density | 20.0 °C | 7.7 g/cm³ |
Mechanical
| Property | Temperature | Value | Comment |
|---|---|---|---|
Elastic modulus | 20.0 °C | 220 GPa | |
100.0 °C | 215 GPa | ||
200.0 °C | 210 GPa | ||
300.0 °C | 205 GPa | ||
400.0 °C | 195 GPa | ||
Elongation | 20.0 °C | 23 % | |
Elongation A80 | 20.0 °C | 23 % | |
Elongation A80, transverse | 20.0 °C | 23 % | |
Elongation, transverse | 20.0 °C | 23 % | |
Poisson's ratio | 23.0 °C | 0.3 [-] | Typical for Austenitic Stainless Steel |
Shear modulus | 23.0 °C | 77 GPa | Typical for Austenitic Stainless Steel |
Tensile strength | 20.0 °C | 400 - 550 MPa | |
Tensile strength, transverse | 20.0 °C | 400 - 550 MPa | |
Yield strength Rp0.2 | 20.0 °C | 230 MPa | |
100.0 °C | 230 MPa | ||
150.0 °C | 220 MPa | ||
200.0 °C | 210 MPa | ||
250.0 °C | 205 MPa | ||
300.0 °C | 200 MPa | ||
350.0 °C | 180 MPa | ||
Yield strength Rp0.2, transverse | 20.0 °C | 250 MPa | |
Thermal
| Property | Temperature | Value | Comment |
|---|---|---|---|
Coefficient of thermal expansion | 100.0 °C | 1.1E-5 1/K | |
300.0 °C | 1.15E-5 1/K | ||
Melting point | 1230 - 1480 °C | Typical for Austenitic Stainless Steel | |
Specific heat capacity | 20.0 °C | 460 J/(kg·K) | |
Thermal conductivity | 20.0 °C | 26 W/(m·K) | |
Electrical
| Property | Temperature | Value |
|---|---|---|
Electrical resistivity | 20.0 °C | 6E-7 Ω·m |
Chemical properties
| Property | Value |
|---|---|
Carbon | 0.03 % |
Chromium | 16 - 17.5 % |
Manganese | 1 % |
Niobium | 0.35 - 0.55 % |
Phosphorus | 0.04 % |
Silicon | 1 % |
Sulfur | 0.015 % |
Metal
- EN 10088-1 X70CrMo15: Soft Annealed Grade for Cutting Tools & Industrial Applications
- X105CrMo17 Soft Annealed Steel (EN 10088-1) – High Hardening & Wear Resistance
- EN 10088-1 Grade X90CrMoV18 – Soft Annealed Steel for High‑Performance Cutting Tools
- EN 10088‑1 Grade X2CrMoTiS18‑2 Soft‑Annealed Steel (+A) – Premium Ferritic Properties
- EN 10088-1 X50CrMoV15 Soft-Annealed Steel: High Strength & Abrasion Resistance
- EN 10088-1 Grade X2CrMoTi29-4 Soft-Annealed Steel for Cold-Rolled Strips
- EN 10088-1 Grade X2CrAlTi18-2 Soft-Annealed Steel – Superior Corrosion Resistance & Mechanical Performance
- EN 10088-1 X6CrNi17-1 Soft‑Annealed Steel (+A) – High Corrosion Resistance & Strength
- EN 10088‑1 X6CrNiTi12 Soft‑Annealed Steel – Grade X6CrNiTi12 (+A) – Specifications & Properties
- EN 10088-1 X2CrMoTi17-1 Soft Annealed Steel – Superior Formability for Appliances & Pipes