DIN 5512‑1 Grade S235JRG2Cu – Untreated Low‑Carbon Steel Specifications

DIN 1725-2 standard is replaced with EN 1706PropertiesGeneralPropertyValueCommentDensity2.65 - 2.7 g/cm³Typical for Cast 3xx.x Series AluminiumMechanicalPropertyValueConditionRelated StandardsCommentElastic modulus73.0 - 80.0 GPaTypical for Cast 3xx.x Series AluminiumElongation2.0 - 4.0 %T6DIN 1725-

The steel is used for rail vehicle engineering acc. to the selected standard DIN 5512-3.The corresponding properties of EN 10088 shall be taken.Application example: railcar bodyRemarks: Protective coating is well applicable and necessary under increased corrosion load and for decorative purposes. No

The expansion material NiFe48Cr possesses a relatively low thermal expansion at 450 °C. (Temperature interval RT to 400 °C: coefficient of thermal expansion 9.9 to 10.7 10^-6 K^-1). It is applied for sealings for soft glasses as well as as surge voltage protection. The alloy is of good durability at

The expansion material NiFe46 with the material number 2.4475 is applied in sealings in soft glasses. It possesses a relatively low thermal expansion up to approximately 450 °C. (Temperature interval RT to 400 °C: coefficient of thermal expansion 9.8 to 10.6 10^-6 K^-1). . The alloy is of relative d