Canvas machining grade for structural and mechanical applications. NP310HT has better impact strength than phenolic paper grades. It meets the requirements of MIL-I-24768/16, IEC-60893-4-PF CC 201 and is designed to meet GE specification A19B15B1.PropertiesGeneralPropertyValueTesting StandardComment

RT511 uses a heavy weave glass fabric substrate meeting all of the requirements of NEMA G-10, with the added feature of having excellent strength at elevated temperatures. Additional versions of the RT511 series are available in medium and fine weave fabrics. Typical applications include bushings, s

The RT500X has excellent electrical properties under humid conditions and very good heat resistance and mechanical properties. RT500X is used when NEMA recognition is needed and fine machining is required. This version is made with an extra-fine weave fabric. RT500X also complies with MIL-I-24768/2,

RT500M is composed of a medium weight glass fabric combined with an epoxy resin system. RT500M combines excellent electrical characteristics with very good physical properties. Electrical properties maintained in high humidity conditions. It also complies with MIL-I-24768/2, Type GEE and ASTM D709 T

The RT500F has good electrical properties under humid conditions, excellent heat resistance and mechanical properties. RT500F is made with a fine weave woven glass fabric, for better machining and a smoother surface finish. It also complies with MIL-I-24768/2, Type GEE and ASTM D709 Type IV Grade G-

The RT500 series has good electrical properties under humid conditions, excellent heat resistance and mechanical properties. RT500 grades are available in medium or fine weave fabrics. It also complies with MIL-I-24768/2, Type GEE and ASTM D709 Type IV Grade G-10.PropertiesGeneralPropertyValueTestin

NP639 is an economical paper reinforced laminate developed with capacity to withstand temperatures to 150°C without blistering. It has high compressive strength and low moisture absorption. It must be post baked to obtain its full mechanical and where characteristics.PropertiesGeneralPropertyValueTe

Post-forming canvas phenolic material. BP15NPN’s mechanical and electrical properties are similar to BP11EPN. It is made from a cotton fabric weighing more than 4 ounces per square yard and having a thread count of not more than 70 threads per inch in both the warp and filler directions. The binder

Fine weave canvas phenolic material with fabric construction weight intermediate to BP11NPN and BP21NPN. BP12NPN is designed for better machining than grade BP11NPN and lower cost than BP21NPN.PropertiesGeneralPropertyValueTesting StandardCommentBonding strength861.8 KgASTM D229Condition ADensity1.3

RT511M meets all of the requirements of NEMA G-10, with the added feature of having excellent strength at elevated temperatures. It is made with a medium weight glass fabric substrate. RT511M also complies with MIL-I-24768/2, Type GEE, ASTM D709 Type IV Grade G-10 and IEC 61212-3-1 EP GC 21 & 22.Pro

RT511F meets all of the requirements of NEMA G-10, with the added feature of having excellent strength at elevated temperatures. The fine weave fabric used in this version provides a better finish to the final part. RT511F also complies with MIL-I-24768/2, Type GEE, ASTM D709 Type IV Grade G-10 and

AlBeMet® metal matrix composite was developed by Materion to combine the high modulus and low density characteristics of beryllium with the fabrication and mechanical property behaviors of aluminum. This material offers significant performance advantages in certain applications when compared to stee

AlBeMet® metal matrix composite was developed by Materion to combine the high modulus and low density characteristics of beryllium with the fabrication and mechanical property behaviors of aluminum. This material offers significant performance advantages in certain applications when compared to stee

AlBeMet® metal matrix composite was developed by Materion to combine the high modulus and low density characteristics of beryllium with the fabrication and mechanical property behaviors of aluminum. This material offers significant performance advantages in certain applications when compared to stee

90%) and a NiFe binder phase.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C16.9 - 17.6 g/cm³DimensionPropertyValueDiameter10 - 40 mmLength250 - 500 mmDimensionsAvailable dimensions (diameter x length, mm x mm): 10 x 250; 12 x 250; 16 x 250; 20 x 500; 25 x 500; 30 x 500; 40 x 500MechanicalPr

Ferro-Titanit® has a titanium carbide content of around 45% by volume, embedded in an alloyed steel binder phase. The materials combine the properties of steel and tungsten-carbide alloys and are highly wear-resistant.PropertiesGeneralPropertyValueDensity6.5 g/cm³Grain structureTitanium carbide + ma

BP21NPM is composed of a linen substrate combined with a phenolic resin system which contains molybdenum disulfide for reduced wear and increased lubrication. Provides the same lubricity as BP13NPM, but has better machining qualities. The mechanical strength is similar to, but slightly less than BP2

NP322 is composed of a linen substrate combined with a phenolic resin system which contains molybdenum disulfide for reduced wear and increased lubrication. Provides the same lubricity as NP313, but has better machining qualities. The mechanical strength is similar to, but slightly less than NP320.P

Hot punching general-purpose phenolic grade. Mechanical properties approach those of NP610 with improved electrical properties and moisture resistance.PropertiesGeneralPropertyValueTesting StandardCommentBonding strength499 KgASTM D229Condition ADensity1.35 g/cm³ASTM D792Moisture absorption1.5 %ASTM

65 HRC. Thanks to the high wear resistance also excellent suitability for abrasive fibre composite materials.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C15.05 g/cm³Grain structureUltrafine (0,2µm - 0,5µm)MechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C646 GPaHardness, Rockw