CTF12E: for gun drills with an adapted relation between hardness and toughness. Suitable also for diamond-coated solid carbide tools.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C14.95 g/cm³Grain structureFine (0,8µm - 1,3µm)MechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C624

BP18NPM is a natural colored composite made from a 24 oz/sq. yd canvas which is passed through the treater twice to insure impregnation of the fibers and to obtain the resin content desired for optimal performance. The resin system is a molybdenum disulfide filled phenolic with good impregnation qua

Bleached canvas phenolic laminate with graphite added as a solid lubricant. This material has improved wear properties under certain conditions. Better moisture absorption and machinability than BPNPG.PropertiesGeneralPropertyValueTesting StandardCommentBonding strength907.2 KgASTM D229Condition ADe

Canvas phenolic laminate with molybdenum disulphide added as a solid lubricant. This material has improved wear properties under certain conditions.PropertiesGeneralPropertyValueTesting StandardCommentBonding strength1043.3 KgASTM D229Condition ADensity1.4 g/cm³ASTM D792Moisture absorption1.5 %ASTM

Canvas phenolic laminate with graphite added as a solid lubricant. This material has improved wear properties under certain conditions.PropertiesGeneralPropertyValueTesting StandardCommentBonding strength816.5 KgASTM D229Condition ADensity1.4 g/cm³ASTM D792Moisture absorption2.2 %ASTM D570Condition

Canvas machining grade for structural and mechanical applications. BP11HPN has better impact strength than phenolic paper grades.PropertiesGeneralPropertyValueTesting StandardCommentBonding strength1088.6 KgASTM D229Condition ADensity1.37 g/cm³ASTM D792Moisture absorption0.8 - 3.4 %ASTM D570Conditio

Being a heat treated version of RTB326, RTB326H is a tube made from a fine cotton fabric and an epoxy resin system. It has low moisture absorption and excellent dimensional stability and chemical resistance. RTB326 meets ASTM F3131 Type FB.PropertiesGeneralPropertyValueTesting StandardCommentDensity

Grade RT130X meets all of the property requirements of NEMA FR-4, with the added feature of being flame resistant, UL94 V-0. RT130X is manufactured with an extra fine glass fabric and has excellent machining characteristics. RT130X also complies with IEC 61212-3-1 EP GC 23.PropertiesGeneralPropertyV

Being a heat treated version of RT511, RT511H uses a heavy weave glass fabric substrate meeting all of the requirements of NEMA G-10, with the added feature of having excellent strength at elevated temperatures.PropertiesGeneralPropertyValueTesting StandardCommentDensity1.78 g/cm³ASTM D792Moisture a

NP613 is constructed from electrical grade of kraft paper and a specially modified epoxy resin system.PropertiesGeneralPropertyValueTesting StandardCommentBonding strength453.6 KgASTM D229Condition ADensity1.35 g/cm³ASTM D792Moisture absorption0.59 %ASTM D570Condition D₁-24/23MechanicalPropertyValue

Supplied in solution-annealed condition. Ferro-Titanit® Cromoni is non-magnetisable, even after ageing at temperatures up to 900 °C.PropertiesGeneralPropertyValueDensity7.4 g/cm³Grain structureTitanium carbide + austeniteMechanicalPropertyValueCompressive strength1500 MPaElastic modulus277 GPaFlexur

Rolled and Molded Rods made from a glass fabric with a high temperature epoxy resin system. G-11 rods are not recognized by NEMA. However, they are recognized by the IEC Standard 61212: grade EP-GC-41. RM511A has equivalent electrical properties to G-10 rods, but with higher mechanical strength at e

MC507U is a utility grade, glass fabric combined with a silicone resin system. MC507U has excellent strength and electrical properties. MC507U complies with MIL-I-24768/17 – GSG, with the exception of some specific electrical properties.PropertiesGeneralPropertyValueTesting StandardCommentBonding st

RT610 is a paper phenolic tube with fair electrical properties in dry conditions. It has good impact, tensile and compressive strength. RT610 also complies with MIL-I-24768/12, Type PBM, ASTM D709 Type I Grade X and IEC-61212-3-1 PF CP 21.PropertiesGeneralPropertyValueTesting StandardCommentDensity1

90%) and a NiFe binder phase.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C18.5 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C385 GPaElongation23.0 °C10 %ASTM B777Hardness, Rockwell C23.0 °C31 [-]Tensile strength23.0 °C800 MPaThermalPropertyTemperatureValueCoefficient

Because of its 13.5% chromium and 3% molybdenum content, WFN has a high tempering resistance up to around 450 °C, as well as high-temperature hardness and good corrosion resistance. The thermal expansi- on coefficient is adjusted to that of steel through the 1% aluminium alloy addition. Lower stress

The matrix structure consists of a highly tough, age-hardenable nickel martensite. The chromium content of 13.5 % provides good corrosion resistance. Finish-machining is performed in the solution-annealed, as- delivered condition. Subsequent age-hardening takes place at a relatively low temperature

Ferro-Titanit® has a titanium carbide content of around 45% by volume, embedded in an alloyed steel binder phase. The materials combine the properties of steel and tungsten-carbide alloys and are highly wear-resistant.PropertiesGeneralPropertyValueDensity6.5 g/cm³Grain structureTitanium carbide + ma

The matrix structure consists of a highly tough, age-hardenable nickel martensite. Finishing is performed in the solution-annealed, as-delivered condition. Subsequent age-hardening takes place at a relatively low temperature of 480 °C and can be conducted, for example, in a convection air furnace or

CTF28T: particularly for the finish machining of steel. Thanks to high oxidation resistance and low tendency to stick it is particularly suitable for the production of uncoated reamers.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C6.4 g/cm³Grain structureFine (0,8µm - 1,3µm)MechanicalProper