DIN 1725-1 Grade 3.0515 H24 Aluminium: Key Properties & Performance
Properties
General
| Property | Value | Comment |
|---|---|---|
Density | 2.72 - 2.73 g/cm³ | Typical for Wrought 3000 Series Aluminium |
Mechanical
| Property | Value | Comment |
|---|---|---|
Elastic modulus | 69.5 - 70.0 GPa | Typical for Wrought 3000 Series Aluminium |
Plane-Strain Fracture Toughnes | 22.0 - 35.0 MPa·√m | Typical for Wrought 3000 Series Aluminium |
Poisson's ratio | 0.33 [-] | Typical for Wrought 3000 Series Aluminium |
Shear modulus | 25.0 - 26.0 GPa | Typical for Wrought 3000 Series Aluminium |
Thermal
| Property | Value | Comment |
|---|---|---|
Coefficient of thermal expansion | 2.2e-05 - 2.4e-05 1/K | Typical for Wrought 3000 Series Aluminium |
Melting point | 629.0 - 654.0 °C | Typical for Wrought 3000 Series Aluminium |
Specific heat capacity | 893.0 - 920.0 J/(kg·K) | Typical for Wrought 3000 Series Aluminium |
Thermal conductivity | 154.0 - 193.0 W/(m·K) | Typical for Wrought 3000 Series Aluminium |
Electrical
| Property | Value | Comment |
|---|---|---|
Electrical conductivity | 23000000.0 - 29000000.0 S/m | Typical for Wrought 3000 Series Aluminium |
Electrical resistivity | 3.4e-08 - 4.2e-08 Ω·m | Typical for Wrought 3000 Series Aluminium |
Chemical properties
| Property | Value | Condition | Related Standards | Shape |
|---|---|---|---|---|
Chromium | 0.1 | H24 | DIN 1725-1 | Strip |
Copper | 0.1 | H24 | DIN 1725-1 | Strip |
Iron | 0.7 | H24 | DIN 1725-1 | Strip |
Manganese | 0.9 - 1.5 % | H24 | DIN 1725-1 | Strip |
Silicon | 0.5 | H24 | DIN 1725-1 | Strip |
Zinc | 0.2 | H24 | DIN 1725-1 | Strip |
Technological properties
| Property | ||
|---|---|---|
| Workability | Good workability. | |
Metal
- DIN 1725-1 Grade 3.0515 H22 – Comprehensive Aluminium Properties
- DIN 1725-1 Grade 3.0915 H24 – High‑Strength AlFeSi Alloy for Precision Forming
- DIN 1725-1 Grade 3.3549 H24 Aluminum Alloy – Properties & Applications
- AlMn1 – DIN 1725‑1 Grade 3.0515 H1x: High‑Strength, Corrosion‑Resistant Aluminum Alloy
- DIN 1725‑1 Grade 3.3309 H24 – Premium Aluminum Alloy for High‑Gloss Applications
- DIN 1725-1 Grade 3.0505 H24 – Premium AlMn0.5Mg0.5 Sheet Metal for High-Performance Applications
- DIN 1725-1 Grade 3.0515 F – High‑Strength Al‑Mn Alloy for Superior Performance
- DIN 1725-1 Grade 3.3315 H24: High-Performance AlMg Alloy for Corrosion-Resistant Applications
- DIN 1725-1 Grade 3.3316 H24 Aluminium-Magnesium Alloy – Superior Corrosion Resistance & Machinability
- DIN 1725-1 Grade 3.0515 H18 Tubes – Ribbed Specifications for Steam Boiler Applications