Connectivity and free-machining alloy. AP4 is a Copper-Nickel-Manganese special alloy with excellent corrosion resistance. It is less machinable than other ARCAP references, it has equivalent machinability to Chrome-Nickel-Molybdenum steels.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.9

Connectivity and free-machining alloy. ARCAP AP4 is a Copper-Nickel-Manganese special alloy with excellent corrosion resistance. It is less machinable than other ARCAP references, it has equivalent machinability to Chrome-Nickel-Molybdenum steels.PropertiesGeneralPropertyTemperatureValueDensity23.0

Connectivity and free-machining alloy. ARCAP AP1D is a unique nickel-silver with outstanding corrosion resistance, strictly amagnetic, can be machined with close to micron precision, resists to high and low temperatures.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.8 g/cm³DimensionProper

Naturally hard AlFe alloy. The alloy is food safe.PropertiesGeneralPropertyValueConditionRelated StandardsShapeDensity2.72 g/cm³OEN 573-1, EN 573-2, EN 573-3, EN 546-2Coil, Foil2.72 g/cm³OEN 573-3, EN 546FoilDimensionPropertyValueConditionRelated StandardsThicknessShapeThickness0.09 mmOEN 573-1,

Alloy M25 from Materion Performance Alloys is a free machining, high performance copper alloy. M25’s properties minimize signal distortion in coaxial RF connectors and reduce power loss in circular connectors and contact probes. M25 is available in spooled or coiled wire product forms, and in differ

Properties: - Al-additives reduces hardening next to the welding seam and thus the tendency for cracking - application temperature: up to 600 °C Application: - for construction of parts in petroleum industry (crack systems) - for welded parts in hydroelectric power plant constructionPropertiesGenera

Material X 1 NiCrMoCu 25 20 5 (X1NiCrMoCu25-20-5), material number 1.4539 is applicated for pressure vessels acc. to TRB 100 and AD-data sheet W 2 and W 10 from -60 to 400 °C., for steam boilers acc. to TRD 101, TRD 102 and TRD 107 up to 400 °C. as well as for pressure gas tanks as per TRG from -60

UGI® KC35N is an non magnetic nickel- cobalt- chromium-molybdenum alloy of the multiphase alloy system that possesses an outstanding combination of ultra high tensile strength, good ductility and toughness, and excellent corrosion resistance. In addition, this alloy display exceptional resistance to

Excellent electrical conductivity.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.69 g/cm³DimensionPropertyValueThickness0.2 - 3 mmMechanicalPropertyTemperatureValueBending angle 90°23.0 °C3 °/tElastic modulus23.0 °C70 GPaShear modulus23.0 °C26.5 GPaThermalPropertyTemperatureValueCommentCoe

Excellent electrical conductivity.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.69 g/cm³DimensionPropertyValueThickness0.2 - 3 mmMechanicalPropertyTemperatureValueBending angle 90°23.0 °C3 °/tElastic modulus23.0 °C70 GPaShear modulus23.0 °C26.5 GPaThermalPropertyTemperatureValueCommentCoe

Excellent electrical conductivity.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.69 g/cm³DimensionPropertyValueThickness0.2 - 3 mmMechanicalPropertyTemperatureValueBending angle 90°23.0 °C3 °/tElastic modulus23.0 °C70 GPaShear modulus23.0 °C26.5 GPaThermalPropertyTemperatureValueCommentCoe

Excellent electrical conductivity.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.69 g/cm³DimensionPropertyValueThickness0.2 - 3 mmMechanicalPropertyTemperatureValueBending angle 90°23.0 °C3 °/tElastic modulus23.0 °C70 GPaShear modulus23.0 °C26.5 GPaThermalPropertyTemperatureValueCommentCoe

With its unique mechanical and chemical properties, molybdenum is an outstanding material that can meet the most exacting requirements. Because molybdenum possesses a very high melting point, a low coefficient of thermal expansion and a high level of thermal conductivity, it is used in many differen

Melted quality tantalum (TaM) is usually more economical to produce than sintered quality tantalum and provides sufficient quality for many applications. However, the material is neither as fine nor as homogeneous as sintered quality tantalum.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C16

Melted quality tantalum (TaM) is usually more economical to produce than sintered quality tantalum and provides sufficient quality for many applications. However, the material is neither as fine nor as homogeneous as sintered quality tantalum.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C16

Materion Brush Performance Alloys’ BrushForm® 96 Strip is a high-performance, heat treatable spinodal copper nickel tin alloy designed to provide optimal formability and strength characteristics in conductive spring applications such as electronic connectors, switches, and sensors. It is available i

Materion Brush Performance Alloys’ BrushForm® 96 Strip is a high-performance, heat treatable spinodal copper nickel tin alloy designed to provide optimal formability and strength characteristics in conductive spring applications such as electronic connectors, switches, and sensors. It is available i

Alloy 25 Tube from Materion Performance Alloys provides the highest strength of any copper alloy, with electrical conductivity considerably greater than other high strength copper alloys. This alloy features high fatigue strength and magnetic permeability approaching unity.PropertiesGeneralPropertyT

Alloy 25 Tube from Materion Performance Alloys provides the highest strength of any copper alloy, with electrical conductivity considerably greater than other high strength copper alloys. This alloy features high fatigue strength and magnetic permeability approaching unity.PropertiesGeneralPropertyT

Alloy 25 Tube from Materion Performance Alloys provides the highest strength of any copper alloy, with electrical conductivity considerably greater than other high strength copper alloys. This alloy features high fatigue strength and magnetic permeability approaching unity.PropertiesGeneralPropertyT