Commercially pure, unalloyed Nickel.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.89 g/cm³DimensionPropertyValueWidth3.18 - 57.15 mmDimensionsAvailable widths: 3.2mm, 4.8mm, 6.4mm, 7.9mm, 9.5mm, 12.7mm, 15.9mm, 19.1mm, 22.2mm, 28.6mm, 31.8mm, 44.5mm, 50.8mm, 57.2mmMechanicalPropertyTemper

A controlled expansion alloy, consisting of 51% Nickel, balance Iron.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.3 g/cm³DimensionPropertyValueThickness0.25 - 0.38 mmDimensionsAvailable thicknesses: 0.254mm, 0.381mmMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C159 GPaElo

A controlled expansion alloy, consisting of 51% Nickel, balance Iron.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.3 g/cm³DimensionPropertyValueWidth1.02 - 7.93 mmDimensionsAvailable widths: 1.0mm, 1.6mm, 2.4mm, 2.4mm, 2.8mm, 3.2mm, 4.0mm, 4.8mm, 6.4mm, 7.9MechanicalPropertyTemperatureVal

Kovar is a controlled expansion alloy. It is a nickel iron alloy with 29% nickel, 17% cobalt and the remaining balance is iron. The expansion characteristics of Kovar match both borosilicate (or Pyrex) glasses and alumina ceramics, making it one of the most popular of the controlled expansion alloys

Naturally hard AlFeSi alloy. The alloy is food safe.PropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity2.71 g/cm³H44EN 573-3, EN 1396, EN 541Strip, Sheet, Plate, Foil20.0 °C2.71 g/cm³H44EN 573-3Sheet, StripMechanicalPropertyTemperatureValueConditionRelated StandardsShapeC

Naturally hard AlMn alloy. The alloy is food safe.PropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity2.72 g/cm³H41EN 573-3, EN 1396Strip, Sheet, Plate, Welded Tube20.0 °C2.72 g/cm³H41EN 573-3Sheet, StripMechanicalPropertyTemperatureValueConditionRelated StandardsShapeComm

Naturally hard AlMg alloy. The alloy is food safe.PropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity2.64 g/cm³H38EN 573-3, EN 1301Rod, Tube, Wire20.0 °C2.64 g/cm³H38EN 573-3WireMechanicalPropertyTemperatureValueConditionRelated StandardsShapeCommentElastic modulus70.0 GP

Naturally hard AlMg alloy. The alloy is food safe.PropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity2.64 g/cm³H18EN 573-3, EN 1301Rod, Tube, Wire20.0 °C2.64 g/cm³H18EN 573-3WireMechanicalPropertyTemperatureValueConditionRelated StandardsShapeCommentElastic modulus70.0 GP

Naturally hard AlMg alloy. The alloy is not food safe.PropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity2.71 g/cm³H19EN 573-3, EN 485Strip, Sheet, Plate20.0 °C2.7 g/cm³H19EN 573-3FlatMechanicalPropertyTemperatureValueConditionRelated StandardsShapeCommentElastic modulus6

Naturally hard AlSi alloy. The alloy is food safe.PropertiesGeneralPropertyValueConditionRelated StandardsShapeDensity2.71 g/cm³OEN 573-3, EN 485Strip, Sheet, PlateMechanicalPropertyTemperatureValueConditionRelated StandardsShapeCommentBending angle 180°1.0 °/tOEN 573-3, EN 485Strip, Sheet, PlateEla

Naturally hard AlSi alloy. The alloy is food safe.PropertiesGeneralPropertyValueConditionRelated StandardsShapeDensity2.71 g/cm³H14EN 573-3, EN 485Strip, Sheet, PlateMechanicalPropertyTemperatureValueConditionRelated StandardsShapeCommentBending angle 180°2.0 °/tH14EN 573-3, EN 485Strip, Sheet, Plat

Naturally hard AlSi alloy. The alloy is food safe.PropertiesGeneralPropertyValueConditionRelated StandardsShapeDensity2.71 g/cm³H12EN 573-3, EN 485Strip, Sheet, PlateMechanicalPropertyTemperatureValueConditionRelated StandardsShapeCommentBending angle 180°1.5 °/tH12EN 573-3, EN 485Strip, Sheet, Plat

Naturally hard AlMn alloy. The alloy is not food safe.PropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity2.71 g/cm³H48EN 573-3, EN 1396Strip, Sheet, Plate2.72 g/cm³H48EN 573-3, EN 1396Strip, Sheet, Plate20.0 °C2.71 g/cm³H48EN 573-3Sheet, StripMechanicalPropertyTemperature

Naturally hard AlMn alloy. The alloy is not food safe.PropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity2.71 g/cm³H46EN 573-3, EN 1396Strip, Sheet, Plate2.72 g/cm³H46EN 573-3, EN 1396Strip, Sheet, Plate20.0 °C2.71 g/cm³H46EN 573-3Sheet, StripMechanicalPropertyTemperature

Aluminium cast plate, The mechanical properties are investigated in T6 conditionPropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.78 g/cm³Surface roughness0.4 μmDimensionPropertyValueThickness10 - 600 mmMechanicalPropertyTemperatureValueElastic modulus23.0 °C72 GPaElongation A5023.0 °C1.5 - 8

Aluminium cast plate, The mechanical properties are investigated in O3 conditionPropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.66 g/cm³DimensionPropertyValueThickness6 - 1000 mmMechanicalPropertyTemperatureValueElastic modulus23.0 °C70 GPaHardness, HBW23.0 °C70 - 80 [-]Tensile strength23.0

Niclafor® 1000 is a range of Copper-Nickel-Tin (CuNi9Sn6) alloys designed and produced by Lebronze alloys (ex. CLAL). Mechanical advantages: Niclafor® 1000 exhibits very high mechanical properties, such as Tensile Strength and Yield Strength above 1,000 MPa (145 ksi) depending on temper, even at hig

Suitable mechanical properties, sea-water and saline mist corrosion resistant, oxidation resistant.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C7.6 g/cm³DimensionPropertyValueDimensionsAvailable size round products (mm): from 16MechanicalPropertyTemperatureValueElastic modulus23.0 °C125 GP

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.66 g/cm³H32EN 573-3, EN 485, EN 754MechanicalPropertyValueConditionRelated StandardsCommentBending Fatigue Strength140.0 MPaH32EN 573-3, EN 485, EN 754Bending angle 180°2.0 °/tH32EN 573-3, EN 4853.0 °/tH32EN 573-3, EN 485Bending angle

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.68 g/cm³OEN 573-3, EN 14286, EN 485, EN 755MechanicalPropertyValueConditionRelated StandardsCommentBending Fatigue Strength115.0 MPaOEN 573-3, EN 485, EN 755Bending angle 180°0.5 °/tOEN 573-3, EN 4851.0 °/tOEN 573-3, EN 14286, EN 4852.