The alloy G-AlMg3 solidified in a wide temperature range, the casting properties are sufficiently. G-AlMg3 poses excellent corrosion resistance especially to sea water and weak alkaline media. The alloy is excellent polishable and able for anodic oxidising for decorative puspose. Application: ship,

The alloy is characterised by a good corrosion resistance. It is sea water steady and resistant to saline atmosphere. The Mg content increases the strength, but the cold forming capacity decreases. The material is nature hard, i.e. only by a cold forming and not by a purposeful heat treatment a stre

The alloy AlMg2Mn0,3 has similar characteristics as the alloy AlMg1,8. The additive of Mn causes an increase of the heat resistance of the material apart from a strength increase with the products of extruding. The material is characterised by a good corrosion resistance. It is sea water steady and

Aluminum DIN 3.3523 is a non-heat treatable alloy with excellent finishing qualities. DIN 3.3523 offers better corrosion resistance than most aluminum alloys, especially to salt water and marine atmospheres. This alloy can be readily welded using most common techniques and is in fact offers some of

Aluminum DIN 3.3523 is a non-heat treatable alloy with excellent finishing qualities. DIN 3.3523 offers better corrosion resistance than most aluminum alloys, especially to salt water and marine atmospheres. This alloy can be readily welded using most common techniques and is in fact offers some of

Aluminum DIN 3.3523 is a non-heat treatable alloy with excellent finishing qualities. DIN 3.3523 offers better corrosion resistance than most aluminum alloys, especially to salt water and marine atmospheres. This alloy can be readily welded using most common techniques and is in fact offers some of

Aluminum DIN 3.3523 is a non-heat treatable alloy with excellent finishing qualities. DIN 3.3523 offers better corrosion resistance than most aluminum alloys, especially to salt water and marine atmospheres. This alloy can be readily welded using most common techniques and is in fact offers some of

Aluminum DIN 3.3523 is a non-heat treatable alloy with excellent finishing qualities. DIN 3.3523 offers better corrosion resistance than most aluminum alloys, especially to salt water and marine atmospheres. This alloy can be readily welded using most common techniques and is in fact offers some of

The alloy is characterised by a good corrosion resistance. It is sea water steady and resistant to saline atmosphere. The Mg content increases the strength, but the cold forming capacity decreases. The material is nature hard, i.e. only by a cold forming and not by a purposeful heat treatment a stre

The alloy is characterised by a good corrosion resistance. It is sea water steady and resistant to saline atmosphere. The Mg content increases the strength, but the cold forming capacity decreases. The material is nature hard, i.e. only by a cold forming and not by a purposeful heat treatment a stre

The alloy is characterised by a good corrosion resistance. It is sea water steady and resistant to saline atmosphere. The Mg content increases the strength, but the cold forming capacity decreases. The material is nature hard, i.e. only by a cold forming and not by a purposeful heat treatment a stre

0.35 mm in accordance to DIN 1745. Application: The main application lies in the building industry. In the building industry for lamella net curtains, rolling shutter, roll gates, in food industry (including table-ware) and for transport containers.PropertiesGeneralPropertyTemperatureValueConditionR

Aluminum EN AW-3003 is a popular alloy that offers customers very good atmospheric corrosion resistance and moderate strength. Aluminum 3003 offers good machinability for aluminum alloys, though it is not heat treatable. Unlike other aluminum alloys, EN AW-3003 is weldable by conventional welding me

Aluminum EN AW-3003 is a popular alloy that offers customers very good atmospheric corrosion resistance and moderate strength. Aluminum 3003 offers good machinability for aluminum alloys, though it is not heat treatable. Unlike other aluminum alloys, EN AW-3003 is weldable by conventional welding me

Age-hardenable AlCu alloy. The alloy is not food safe.PropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity2.8 g/cm³T3511EN 573-3, EN 754Strip, Sheet, Plate, Tube, Bar20.0 °C2.8 g/cm³T3511EN 573-3TubeMechanicalPropertyTemperatureValueConditionRelated StandardsShapeCommentEl

Age-hardenable AlCu alloy. The alloy is not food safe.PropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity2.8 g/cm³T3510EN 573-3, EN 754Strip, Sheet, Plate, Tube, Bar20.0 °C2.8 g/cm³T3510EN 573-3TubeMechanicalPropertyTemperatureValueConditionRelated StandardsShapeCommentEl

Age-hardenable AlCu alloy. The alloy is not food safe.PropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity2.8 g/cm³T351EN 573-3, EN 754Strip, Sheet, Plate, Tube, Bar20.0 °C2.8 g/cm³T351EN 573-3RodMechanicalPropertyTemperatureValueConditionRelated StandardsShapeCommentElast

Age-hardenable AlCu alloy. The alloy is not food safe.PropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity2.8 g/cm³T3EN 573-3, EN 754Strip, Sheet, Plate, Tube, Bar20.0 °C2.8 g/cm³T3EN 573-3Rod, TubeMechanicalPropertyTemperatureValueConditionRelated StandardsShapeCommentEla

DIN 3.4365 is a high-strength alloy that offers good stress-corrosion cracking resistance. Known as a mainstay in the aerospace industry since it was introduced, Aluminum 7075 brings moderate toughness as well as an excellent strength-to-weight ratio. It is also important to note that at sub-zero te

DIN 3.4365 is a high-strength alloy that offers good stress-corrosion cracking resistance. Known as a mainstay in the aerospace industry since it was introduced, Aluminum 7075 brings moderate toughness as well as an excellent strength-to-weight ratio. It is also important to note that at sub-zero te