High corrosion resistance against seawater.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.66 g/cm³DimensionPropertyValueThickness0.2 - 3 mmMechanicalPropertyTemperatureValueElastic modulus23.0 °C71 GPaElongation A5023.0 °C1 %Hardness, HBW23.0 °C104 [-]Shear modulus23.0 °C27 GPaTensile stre

High corrosion resistance against seawater.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.66 g/cm³DimensionPropertyValueThickness0.2 - 4 mmMechanicalPropertyTemperatureValueElastic modulus23.0 °C71 GPaElongation A5023.0 °C2 - 3 %Hardness, HBW23.0 °C96 [-]Shear modulus23.0 °C27 GPaTensile s

UGIMA® 4435 ICH is an austenitic stainless steel (not magnetic) with high molybdenum content and a specific metallurgy for improved behaviour during machining. Its composition provides it with very good corrosion resistance and is perfectly suited for prolonged contact with the skin. It also offers

UGIMA® 4435 ICH is an austenitic stainless steel (not magnetic) with high molybdenum content and a specific metallurgy for improved behaviour during machining. Its composition provides it with very good corrosion resistance and is perfectly suited for prolonged contact with the skin. It also offers

UGI® 4410 is a superduplex stainless steel designed for applications in highly corrosive environments. It has the following advantages: very high mechanical properties; excellent resistance to different types of corrosion in aggressive environments. In its delivery condition (solution-annealed),

UGIMA® 4362 is an austeno-ferritic stainless steel (Duplex) with better machinability than a standard 1.4362 (UGI® 4362), due mainly to reduced tool wear and better chip breakability. UGIMA® 4362 complies with the specification of 1.4362 in accordance with EN 10088-3, but retains all the qualities

UGIMA® 4005 is a martensitic stainless steel containing 12 to 14% chromium with a machinability improvement of 15 to 30% thanks to the UGIMA® process which enables its oxide inclusions to be controlled. UGIMA® 4005 keeps its other properties as standard UGI 4005 (cold working, weldability, corrosi

Duplex stainless steel with high corrosion resistance and high mechanical performances, UGI® 4462 has excellent corrosion resistance in aggressive environments, coupled with high mechanical properties. The chemical composition of UGI® 4462 is optimised to obtain, after a solution annealing heat tre

0.1%) and copper (1.5%) to significantly improve its machinability. In addition, UGIMA® 4598 benefits from the UGIMA® manufacturing process that ensures even better machinability. The addition of copper partly compensates for the reduced corrosion resistance which can be expected from the higher sul

0.1%) and copper (1.5%) to significantly improve its machinability. In addition, UGIMA® 4598 benefits from the UGIMA® manufacturing process that ensures even better machinability. The addition of copper partly compensates for the reduced corrosion resistance which can be expected from the higher sul

UGI 4404FGX3 is a molybdenum austenitic stainless steel belonging to the 316L family. Its low carbon content provides good corrosion resistance on welded areas. In addition, UGI 4404FGX3 has good machinability properties. UGI 4404FGX3 has a mainly austenitic microstructure with traces of residual

UGI 4404FGX3 is a molybdenum austenitic stainless steel belonging to the 316L family. Its low carbon content provides good corrosion resistance on welded areas. In addition, UGI 4404FGX3 has good machinability properties. UGI 4404FGX3 has a mainly austenitic microstructure with traces of residual

Due to the global trend toward smaller and thinner electronic components, demand for phosphor bronze with higher strength and bendability has been increasing as the base material. To meet such needs, Harada has added a newly developed material to its products line-up, a high quality phosphor bronze

1.4028 (X30Cr13) is used in the quenched and tempered condition in a host of constructional and fastener applications where moderate corrosion resistance is required. Due to its higher carbon content, it has good hardenability. As for other martensitic grades, optimal corrosion resistance is attaine

Quantity: One truck load – Specialty products on request.Additional services: Via Cindal (the Aludium R&D department): R&D services, benchmarking, chemical audits, material specification, process optimisation, quality monitoring, sample analysis, prototyping, trainingPropertiesGeneralPropert

Aluminum Alloy AA 2219, an age-hardenable alloy is produced with a copper additive. It is well-known for its excellent structural strength and it’s used for numerous high temperature applications. It is a suitable alloy for many metalworking processes including machining, forming, heat treatment,

Aluminum Alloy AA 2219, an age-hardenable alloy is produced with a copper additive. It is well-known for its excellent structural strength and it’s used for numerous high temperature applications. It is a suitable alloy for many metalworking processes including machining, forming, heat treatment,

Aluminum Alloy AA 2219, an age-hardenable alloy is produced with a copper additive. It is well-known for its excellent structural strength and it’s used for numerous high temperature applications. It is a suitable alloy for many metalworking processes including machining, forming, heat treatment,

Aluminum Alloy AA 2219, an age-hardenable alloy is produced with a copper additive. It is well-known for its excellent structural strength and it’s used for numerous high temperature applications. It is a suitable alloy for many metalworking processes including machining, forming, heat treatment,

Aluminum AA 2024, known for its use in aircraft industry, is an alloy that offers excellent strength. When in the annealed condition it is readily formed and has good machinability. Though it has a relatively low level of corrosion resistance, it can be machined to a high finish.PropertiesGeneralPro