Suitable mechanical properties, sea-water corrosion resistant, saline mist resistant, oxidation resistant.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C7.6 g/cm³DimensionPropertyValueDimensionsAvailable size round products (mm): 76,2-254MechanicalPropertyTemperatureValueElastic modulus23.0

Alloy 3 from Materion Performance Alloys provides high electrical and thermal conductivity coupled with moderate strength.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.83 - 8.9 g/cm³DimensionPropertyValueCommentDiameter1.27 - 12.7 mmLength610 - 91000 mmmax. Rod and BarOutside diameter0.76

1.7139 (16MnCrS5) has high sulfur content and is therefore suitable for machining processing.PropertiesGeneralPropertyValueDensity7.8 g/cm³DimensionPropertyValueCommentDiameter63 mmmax.MechanicalPropertyValueCommentElastic modulus210 GPaElongation9 - 11 %A5Hardness, Brinell138 - 237 [-]Depending on

Sandvik 3RE60 is a duplex (austenitic-ferritic) stainless steel characterized by the following properties: High resistance to stress corrosion cracking (SCC) in chloride-bearing environments Good resistance to general corrosion and pitting High mechanical strength – roughly twice the proof strength

Sandvik 3R60 is an austenitic chromium-nickel steel with minimum 2.5% molybdenum and a low carbon content. Sandvik 3R60TM is also available in a variant for the urea industry, Sandvik 3R60TM Urea Grade. More technical information and charts that are relevant to the materials corrosion, mechanical a

Sandvik 7RE10 is an austenitic, stainless chromium-nickel steel of the 25/20 type, suitable for high-temperature applications. The grade is characterized by: Good resistance to carburization, sulphidation, and oxidation combined with moderate creep strength and structural stability. A maximum servi

Sandvik 3R60™ Urea Grade is a high-purity variant of ASTM 316L, specially developed for the urea industry. The grade has a guaranteed maximum ferrite content of 0.6%. Sandvik 3R60™ Urea Grade is characterized by: High resistance to corrosion in ammonium carbamate High resistance to intergranular co

Titanium UNS R56400 alloy is the most commercially available of all titanium alloys. It offers an excellent combination of high strength and toughness. UNS R56400 titanium has good welding and fabrication characteristics.PropertiesGeneralPropertyValueRelated StandardsShapeDensity4.428999999999999 g/

Commercially pure, unalloyed Nickel.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.89 g/cm³DimensionPropertyValueThickness0.25 - 1.57 mmWidth304.8 mmDimensionsAvailable thicknesses: 0.3mm, 0.5mm, 0.8mm, 1.3mm, 1.6mmMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C207 GPaElong

Commercially pure, unalloyed Nickel.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.89 g/cm³DimensionPropertyValueThickness0.25 - 1.57 mmWidth304.8 mmDimensionsAvailable thicknesses: 0.25mm, 0.51mm, 0.76mm, 1.27mm, 1.57mmMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C207 GPa

A controlled expansion nickel iron alloy, consisting of nearly 41% nickel, balance iron.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.12 g/cm³DimensionPropertyValueThickness0.25 - 2.03 mmWidth304.8 mmDimensionsAvailable thicknesses: 0.254mm, 0.381mm, 0.508mm, 2.032mmMechanicalPropertyTemp

Kovar is a controlled expansion alloy. It is a nickel iron alloy with 29% nickel, 17% cobalt and the remaining balance is iron. The expansion characteristics of Kovar match both borosilicate (or Pyrex) glasses and alumina ceramics, making it one of the most popular of the controlled expansion alloys

Materion Performance Alloy C95520 is an Aluminum-Nickel-Bronze alloys that combine high strength, ductility, and good abrasion resistance under severe loading conditions. Materion uses the EquaCast® process to produce C95520. This process produces an extremely uniform, fine grained microstructure an

High corrosion resistance against seawater.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.66 g/cm³DimensionPropertyValueThickness0.2 - 4 mmMechanicalPropertyTemperatureValueElastic modulus23.0 °C71 GPaElongation A5023.0 °C2 - 3 %Hardness, HBW23.0 °C96 [-]Shear modulus23.0 °C27 GPaTensile s

High corrosion resistance against seawater.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.66 g/cm³DimensionPropertyValueThickness0.2 - 4 mmMechanicalPropertyTemperatureValueElastic modulus23.0 °C71 GPaElongation A5023.0 °C1 - 2 %Hardness, HBW23.0 °C98 [-]Shear modulus23.0 °C27 GPaTensile s

High corrosion resistance against seawater.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.66 g/cm³DimensionPropertyValueThickness0.2 - 6 mmMechanicalPropertyTemperatureValueElastic modulus23.0 °C71 GPaElongation A5023.0 °C2 - 3 %Hardness, HBW23.0 °C90 [-]Shear modulus23.0 °C27 GPaTensile s

High corrosion resistance against seawater.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.66 g/cm³DimensionPropertyValueThickness0.2 - 6 mmMechanicalPropertyTemperatureValueElastic modulus23.0 °C71 GPaElongation A5023.0 °C3 - 6 %Hardness, HBW23.0 °C81 [-]Shear modulus23.0 °C27 GPaTensile s

Universal work hardening alloy with medium strength, very good formability, very good corrosion resistance, and good durability properties.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.68 g/cm³DimensionPropertyValueThickness0.2 - 6 mmMechanicalPropertyTemperatureValueElastic modulus23.0 °

Universal work hardening alloy with medium strength, very good formability, very good corrosion resistance, and good durability properties.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.68 g/cm³DimensionPropertyValueThickness0.2 - 6 mmMechanicalPropertyTemperatureValueElastic modulus23.0 °

Universal work hardening alloy with medium strength, very good formability, very good corrosion resistance, and good durability properties.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.68 g/cm³DimensionPropertyValueThickness0.2 - 3 mmMechanicalPropertyTemperatureValueElastic modulus23.0 °