PropertiesGeneralPropertyValueCommentDensity8.47 g/cm³Typical for Cast Copper Brass Yellow BrassGrain size0.0307 μmPredicted ValueMechanicalPropertyValueRelated StandardsShapeCommentCompressive strength1162 MPaPredicted ValueElastic modulus110 - 130 GPaTypical for Cast Copper Brass Yellow BrassFatig

PropertiesGeneralPropertyValueCommentDensity8.47 g/cm³Typical for Cast Copper Brass Yellow BrassGrain size0.0307 μmPredicted ValueMechanicalPropertyValueRelated StandardsShapeCommentCompressive strength1151 MPaPredicted ValueElastic modulus110 - 130 GPaTypical for Cast Copper Brass Yellow BrassFatig

Naturally hard AlFeSi alloy. The alloy is food safe.PropertiesGeneralPropertyValueConditionRelated StandardsShapeDensity2.72 g/cm³H19EN 546-2, EN 683-2, EN 573-1, EN 573-2, EN 573-3Foil2.72 g/cm³H19EN 573-3, EN 683FoilDimensionPropertyValueConditionRelated StandardsThicknessShapeThickness0.06 mm

Alloy 3 from Materion Performance Alloys provides high electrical and thermal conductivity coupled with moderate strength.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.83 - 8.9 g/cm³DimensionPropertyValueCommentDiameter1.27 - 12.7 mmLength610 - 91000 mmmax. Rod and BarOutside diameter0.76

Alloy 10 from Materion Performance Alloys provides high electrical and thermal conductivity coupled with moderate strength.Additional services: Research & Development, Technical Consulting, Finished Machined Parts, Rough Cutting & Rough Machining, Quality Control LEBRONZE ALLOYSMANUFACTURERI

NITRONIC® 50 is manganese alloyed austenitic stainless steel with improved corrosion resistance compared to 316L and 317L due to increased chromium content plus about twice the yield strength of the same at room temperature. Unlike many austenitic alloys, NITRONIC® 50 does not become magnetic when c

Sandvik 6R35 is an austenitic, titanium-stabilized stainless chromium-nickel steel. It is suitable for wet-corrosive service but also has good mechanical strength at high temperatures. Datasheet URL: Sandvik 6R35 Datasheet updated 2019-08-28 09:50 (supersedes all previous editions) PropertiesGener

Sandvik 5R10 is an austenitic chromium-nickel steel with a controlled carbon content in order to obtain improved strength at high temperatures. More technical information and charts that are relevant to the materials corrosion, mechanical and physical performance are displayed in the figures on the

Sandvik 3R12 is an austenitic stainless chromium-nickel steel with a low carbon content. More technical information and charts that are relevant to the materials corrosion, mechanical and physical performance are displayed in the figures on the right side of the material page. Datasheet URL: Sand

Aluminum AA 2011 is a popular age-hardenable alloy known for its free-machining characteristics and mechanical properties. It can be machined to very close tolerances while still maintaining a smooth and bright finish. Unlike other aluminum alloys, AA 2011 does not offer good corrosion resistance or

Sanicro® 69 is an austenitic nickel-chromium-iron alloy used primarily for steam generators in nuclear power plants (PWR). For this application it is used in the thermally treated condition. This treatment results in chromium carbide precipitation at the grain boundaries but no significant chromium

Sandvik SAF 2906™ is a high-alloy duplex (austenitic-ferritic) stainless steel with excellent corrosion resistance in caustic environments and environments with chlorides. Sandvik SAF 2906™ characteristics: Excellent resistance to caustic environments, also in the presence of contaminants such as c

UGI® 4062 is an austenitic-ferritic or duplex stainless steel with a minimum content of 22 % chromium and 2 % nickel, specially designed as an economically interesting alternative to the grades of the types 1.4301/1.4307 (AISI 304/304L) and 1.4310 (AISI 302/301). This grade has high mechanical prope

UGI® 4539 is austenitic steel that is designed for high corrosion resistance, especially in Sulfuric Acid, in a wide range of process (chemical) environments. The combination of high chromium and nickel content, coupled with additions of molybdenum assure good to excellent corrosion resistance. It

UGI®347H / UGI®4550 is an austenitic stainless steel stabilized with niobium (Nb) specifically intended for use at high temperature (up to 850°C). UGI®347H / UGI®4550 has better mechanical properties at high temperature and better intergranular corrosion resistance than 304/1.4301 if it is used at b

The patented process gives AMPCO® M4 mechanical properties beyond the range of commercial nickel-aluminium bronzes, comparable to beryllium copper at a lower cost and without the beryllium copper industrial hygiene requirements.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C7.45 g/cm³Recycle

The patented process gives AMPCO® M4 mechanical properties beyond the range of commercial nickel-aluminium bronzes, comparable to beryllium copper at a lower cost and without the beryllium copper industrial hygiene requirements.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C7.45 g/cm³Recycle

The patented process gives AMPCO® M4 mechanical properties beyond the range of commercial nickel-aluminium bronzes, comparable to beryllium copper at a lower cost and without the beryllium copper industrial hygiene requirements.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C7.45 g/cm³Recycle

2.4692 (NiFeCr27Mo6CuN) is a Nickel-Iron-Chromium-Molybdenum alloy with a controlled addition of nitrogen. For an improved metallurgical stability the alloy has an optimized nickel content compared to VDM® Alloy 31 and shows the following features and properties: High corrosion resistance similar t

Due to the global trend toward smaller and thinner electronic components, demand for phosphor bronze with higher strength and bendability has been increasing as the base material. To meet such needs, Harada has added a newly developed material to its products line-up, a high quality phosphor bronze