AbstractNanotechnology has become the most promising area of research with its momentous application in all fields of science. In recent years, tin oxide has received tremendous attention due to its fascinating properties, which have been improved with the synthesis of this material in the nanometer

AbstractThe InAs/GaSb superlattice infrared detector has been developed with tremendous effort. However, the performance of it, especially long-wavelength infrared detectors (LWIR), is still limited by the electrical performance and optical quantum efficiency (QE). Forcing the active region to be p-

AbstractHere we report a comprehensive numerical study for the operating behavior and physical mechanism of nitride micro-light-emitting-diode (micro-LED) at low current density. Analysis for the polarization effect shows that micro-LED suffers a severer quantum-confined Stark effect at low current

AbstractAs a representative wide bandgap semiconductor material, gallium nitride (GaN) has attracted increasing attention because of its superior material properties (e.g., high electron mobility, high electron saturation velocity, and critical electric field). Vertical GaN devices have been investi

AbstractA bilateral gate-controlled S/D symmetric and interchangeable bidirectional tunnel field effect transistor (B-TFET) is proposed in this paper, which shows the advantage of bidirectional switching characteristics and compatibility with CMOS integrated circuits compared to the conventional asy

AbstractTwo-dimensional Janus materials have great potential for the applications in spintronic devices due to their particular structures and novel characteristics. However, they are usually non-magnetic in nature. Here, different transition metals (TMs: Co, Fe, Mn, Cr, and V) adsorbed WSSe framewo

AbstractIn recent years, the development of lithium-ion batteries (LIBs) with high energy density has become one of the important research directions to fulfill the needs of electric vehicles and smart grid technologies. Nowadays, traditional LIBs have reached their limits in terms of capacity, cycl

AbstractConsider material machinability and lattice mismatch sapphire as substrates for the ultraviolet-C light-emitting diodes (UV-C LEDs) are commonly used, but their high refractive index can result in the total internal reflection (TIR) of light whereby some light is absorbed, therefore caused r

AbstractParkinsons disease (PD) is characterized by the progressive loss of dopaminergic neurons in the midbrain, and the stem cell transplantation method provides a promising strategy for the treatment. In these studies, tracking the biological behaviors of the transplanted cells in vivo is essenti

AbstractHyperthermia is one of the most patient-friendly methods to cure cancer diseases owing to its noninvasiveness, minimally induced side-effects and toxicity, and easy implementation, prompting the development of novel therapeutic methods like photothermally triggering dose system. This researc

AbstractIn this paper, a terahertz (THz) biosensor based on all-metal metamaterial is theoretically investigated and experimentally verified. This THz metamaterial biosensor uses stainless steel materials that are manufactured via laser-drilling technology. The simulation results show that the maxim

AbstractAg50Cu50 films were deposited on glass substrates by a sputtering system. Effects of accumulated energy on nanoparticle formation in pulse-laser dewetting of AgCu films were investigated. The results showed that the properties of the dewetted films were found to be dependent on the magnitude

AbstractMyocarditis is a disease characterized by localized or diffuse inflammation of the myocardium without efficient treatment. This study explored the regulatory mechanism of microRNA-133 (miR-133) secreted from bone marrow mesenchymal stem cell-derived exosome (BMSC-Exo) on myocardial fibrosis

AbstractThis work proposed a modified plasma induced charging (PID) detector to widen the detection range, for monitoring the possible plasma damage across a wafer during advanced CMOS BEOL processes. New antenna designs for plasma induced damage patterns with extended capacitors are investigated. B

AbstractElastomeric nanostructures are normally expected to fulfill an explicit mechanical role and therefore their mechanical properties are pivotal to affect material performance. Their versatile applications demand a thorough understanding of the mechanical properties. In particular, the time dep

AbstractAs one of the most promising embedded non-volatile storage solutions for advanced CMOS modules, resistive random access memory’s (RRAM) applications depend highly on its cyclability. Through detailed analysis, links have been found between noise types, filament configurations and the occurre

AbstractPiezoelectric nanogenerators (PNGs) have been studied as renewable energy sources. PNGs consisting of organic piezoelectric materials such as poly(vinylidene fluoride) (PVDF) containing oxide complex powder have attracted much attention for their stretchable and high-performance energy conve

AbstractElectrospinning is a common and versatile process to produce nanofibers and deposit them on a collector as a two-dimensional nanofiber mat or a three-dimensional (3D) macroscopic arrangement. However, 3D electroconductive collectors with complex geometries, including protruded, curved, and r

AbstractDuring the nano-cutting process, monocrystalline gallium arsenide is faced with various surface/subsurface deformations and damages that significantly influence the product’s performance. In this paper, molecular dynamics simulations of nano-cutting on gallium arsenide are conducted to inves

AbstractIn this work, we used a sequential method of synthesis for gold–silver bimetallic nanoparticles with core@shell structure (Au@AgNPs). Rumex hymenosepalus root extract (Rh), which presents high content in catechins and stilbenes, was used as reductor agent in nanoparticles synthesis. Size dis