Nanomaterials
AbstractThis work presents a method for obtaining a color-converted red light source through a combination of a blue GaN light-emitting diode and a red fluorescent color conversion film of a perovskite CsPbI3/TOPO composite. High-quality CsPbI3 quantum dots (QDs) were prepared using the hot-injectio
AbstractAn ultrathin and flexible metamaterial absorber (MA) with triple absorption peaks is presented in this paper. The proposed absorber has been designed in such a way that three absorption peaks are located at 8.5, 13.5, and 17 GHz (X and Ku bands) with absorption of 99.9%, 99.5%, and 99.9%, re
AbstractFlame spray pyrolysis was a process to produce oxide nanoparticles in a self-sustaining flame. When the produced nanoparticles were deposited on a substrate, nanostructured oxide thin films could be obtained. However, the size of the thin film was usually limited by the fixed substrate. Here
AbstractThe Van der Waals (vdWs) hetero-structures consist of two-dimensional materials have received extensive attention, which is due to its attractive electrical and optoelectronic properties. In this paper, the high-quality large-size graphene film was first prepared by the chemical vapor deposi
AbstractDelivery of tumor-specific inhibitors is a challenge in cancer treatment. Antibody-modified nanoparticles can deliver their loaded drugs to tumor cells that overexpress specific tumor-associated antigens. Here, we constructed sorafenib-loaded polyethylene glycol-b-PLGA polymer nanoparticles
AbstractAccumulating evidence has shown that microRNA (miR) derived from M1 macrophage-derived exosomes can regulate the progression of hepatocellular carcinoma (HCC). However, the effect of miR-326 derived from M1 macrophage-derived exosomes on HCC has not been reported. Therefore, the objective of
AbstractIn this research, we report the green, blue, and orange color emitting N-doped carbon dots (CDs), which are being synthesized from ascorbic acid and o-/m-/p-phenylenediamine (o-PDA, m-PDA, and p-PDA, respectively). The effects of the solvent polarity and solution pH on the PL emission proper
AbstractIn this paper, a periodic structure based on metallic split-ring resonators is integrated into micro-bridge structures of THz microbolometer array to achieve high THz wave absorption in a wide frequency range. With a small unit size of 35 μm × 35 μm, the effect of split-ring structure on THz
AbstractTo understand the genotoxicity induced in the liver by silver nanoparticles (AgNPs) and silver ions, an engineered gold nanorod core/silver shell nanostructure (Au@Ag NR) and humanized hepatocyte HepaRG cells were used in this study. The involvement of oxidative stress and cell cycle arrest
AbstractVertical gate-all-around field-effect transistors (vGAAFETs) are considered as the potential candidates to replace FinFETs for advanced integrated circuit manufacturing technology at/beyond 3-nm technology node. A multilayer (ML) of Si/SiGe/Si is commonly grown and processed to form vertical
AbstractSpintronics is the most promising technology to develop alternative multi-functional, high-speed, low-energy electronic devices. Due to their unusual physical characteristics, emerging two-dimensional (2D) materials provide a new platform for exploring novel spintronic devices. Recently, 2D
AbstractZinc oxide (ZnO) is a fascinating semiconductor material with many applications such as adsorption, photocatalysis, sensor, and antibacterial activities. By using a poly (vinyl alcohol) (PVA) polymer as a capping agent and metal oxides (iron and manganese) as a couple, the porous PVA-aided Z
AbstractIt has been presented the role of long non-coding RNAs (lncRNAs) in cervical cancer (CC). We aim to discuss the effect of sex-determining region Y-box 2 (SOX2)/lncRNA colon cancer-associated transcript-1 (CCAT1)/microRNA-185-3p (miR-185-3p)/forkhead box protein 3 (FOXP3) on the proliferation
AbstractObjectiveEsophageal squamous cell carcinoma (ESCC) is featured by early metastasis and late diagnosis. MicroRNA-301 (miR-301) is known to participate in diverse cancers. Nevertheless, effects of miR-301 on ESCC remain unexplored. Thus, we aim to explore the role of miR-301 in ESCC progressio
AbstractConductive and degradable nanofibrous scaffolds have great potential in promoting cell growth, proliferation, and differentiation under an external electric field. Although the issue of inferior electrical conductivity in body fluids still exists, polyaniline (PANI)-based degradable nanofibe
AbstractStrain engineering has become one of the effective methods to tune the electronic structures of materials, which can be introduced into the molecular junction to induce some unique physical effects. The various γ-graphyne nanoribbons (γ-GYNRs) embedded between gold (Au) electrodes with strai
AbstractIn this manuscript, the inorganic perovskite CsPbI2Br and CsPbIBr2 are investigated as photoactive materials that offer higher stability than the organometal trihalide perovskite materials. The fabrication methods allow anti-solvent processing the CsPbIxBr3−x films, overcoming the poor film
AbstractTopologically protected chiral skyrmions are an intriguing spin texture that has attracted much attention because of fundamental research and future spintronic applications. MnSi with a non-centrosymmetric structure is a well-known material hosting a skyrmion phase. To date, the preparation
AbstractPeriodical silver nanoparticle (NP) arrays were fabricated by magnetron sputtering method with anodic aluminum oxide templates to enhance the UV light emission from ZnO by the surface plasmon resonance effect. Theoretical simulations indicated that the surface plasmon resonance wavelength de
AbstractThe greatest contributors to cancer mortality are metastasis and the consequences of its treatment. Here, we present a novel treatment of metastatic breast cancer that combines photothermal therapy with targeted single-walled carbon nanotubes (SWCNTs) and immunostimulation with a checkpoint
Nanomaterials
MQ2 Gas Sensor: Functionality, Working Mechanism, and Practical Applications
NASA Confirms Successful Extension of James Webb Telescope's Deployable Tower Assembly
Fab & Assembly Drawing Standards: Best Practices for Clear PCB Communication
Why PETG Won’t Stick to Your 3D Print Bed — Solutions & Tips