CuZr, mat. No CW120C, is counted among hardenable, low alloyed copper alloys. To the comparable make CuZr, mat. No 2.1580, acc. to DIN 17666 : 1983-12 applies: The strength properties of CuZr are not as favorable as for CuCrZr but it very well meets high requirements to tempering strength and creep

Seamless tubes of the high-temperature 8MoB5-4 are used in steam boiler and pipeline construction, pressure vessel and apparatus engineering, especially in chemical industry and power station construction at temperatures from approx. 200 °C to maximum 400 °C and simultaneously high pressures. The to

Seamless tubes of the high-temperature 11CrMo9-10 are used in steam boiler and pipeline construction, pressure vessel and apparatus engineering, especially in chemical industry and power station construction at temperatures from approx. 200 °C to maximum 400 °C and simultaneously high pressures. The

Material Cu-FRTP, mat. No CW006A, is an oxygenous copper-sort of min. 99,90% Cu. It is incomparable to any DIN-mark and it is applicated in the form of plates, sheets, bands, stripes and circular blanks as well as in the form of bars.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C8.9 g/cm³Me

PropertiesGeneralPropertyTemperatureValueDensity20.0 °C8.9 - 8.94 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus20.0 °C129 - 132 GPaElongation20.0 °C33 - 42 %Hardness, Vickers20.0 °C55 [-]Poisson's ratio20.0 °C0.34 [-]Shear modulus23.0 °C48 GPaTypical for Wrought Copper Pure / Lo

PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.83 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus-100.0 °C217 GPa20.0 °C212 GPa100.0 °C207 GPa200.0 °C199 GPa300.0 °C192 GPa400.0 °C184 GPa500.0 °C175 GPa600.0 °C164 GPaElongation20.0 °C18 %Elongation, transverse20.0 °C16 %Poiss

PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.84 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus-100.0 °C217 GPa20.0 °C212 GPa100.0 °C207 GPa200.0 °C199 GPa300.0 °C192 GPa400.0 °C184 GPa500.0 °C175 GPa600.0 °C164 GPaElongation20.0 °C16 - 19 %Elongation, transverse20.0 °C17 %

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Medium Carbon SteelMechanicalPropertyTemperatureValueCommentCharpy impact energy23.0 °C17 JElastic modulus23.0 °C200 - 215 GPaTypical for Medium Carbon SteelElongation A5023.0 °C24 %Poisson's ratio23.0 °C0.

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A523.0 °C16 %Elongation A5023.0 °C12 - 20 %Elongation A8023.0 °C10 - 18 %Poisson

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A523.0 °C12 - 16 %Elongation A5023.0 °C12 - 20 %Elongation A8023.0 °C10 - 18 %Po

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A523.0 °C14 - 18 %Elongation A5023.0 °C12 - 20 %Elongation A8023.0 °C10 - 18 %Po

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A523.0 °C21 %Impact strength, Charpy notched-45.0 °C14 kJ/m²Poisson's ratio

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A5023.0 °C37 %Elongation A8023.0 °C36 %Hardness, Rockwell B23.0 °C50 [-]Hardness

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A5023.0 °C31 %Elongation A8023.0 °C30 %Hardness, Rockwell B23.0 °C57 [-]Hardness

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A5023.0 °C35 %Elongation A8023.0 °C34 %Hardness, Rockwell B23.0 °C53 [-]Hardness

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.9 - 8.2 g/cm³Typical for Austenitic Stainless SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C195 GPaTypical for Austenitic Stainless SteelElongation A523.0 °C30 %Hardness, Brinell23.0 °C167 [-]Hardness, Rockwell B23

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.9 - 8.2 g/cm³Typical for Austenitic Stainless SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C195 GPaTypical for Austenitic Stainless SteelElongation A523.0 °C30 %Hardness, Brinell23.0 °C179 [-]Hardness, Rockwell B23

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A523.0 °C18 - 24 %Impact strength, Charpy notched0.0 °C27 kJ/m²Poisson's ra

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A5023.0 °C37 %Elongation A8023.0 °C36 %Hardness, Rockwell B23.0 °C50 [-]Hardness

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A5023.0 °C35 %Elongation A8023.0 °C34 %Hardness, Rockwell B23.0 °C53 [-]Hardness