Material CuSn8P, mat. No. CW459K, is comparable to the DIN-make CuSn8 (2.1030). Also comparable to this DIN-make is the EN-make CuSn8 (CW453K). The alloyed by phosphor make (0,2 to 0,4%) is used for friction bearings only.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C8.8 g/cm³MechanicalProp

The steel 125Cr2 is used as cold rolled strip for springs and special applications in thicknesses of up to 6 mm and as tempered cold strip in thicknesses from 0.30 to 3.00 mm.PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.72 - 8 g/cm³Typical for Tool And Machining SteelMechanicalPro

GGL NiCr 30 3 is to 800 °C heat and thermal shock-steadily, well corrosion resistant with increased temperatures, particularly erosion steady in saturated steam and salt dredging, middle thermal expansion. The material is comparable to UNS F 41004 with US. Application: For pumps, boiler, valves, fil

GGG NiMn 23 4, material number 0.7673, as GGG NiMn 23 3 also contained in VdTUEV Wbl 376 : 2001-06, possesses a particularly high strain. It is not magnetizable and cold-toughly to -196 °C. Application: Use for cast pieces of the refrigeration technology to -196 °C. According to VdTUEV Wbl 367 : 200

GGG NiSiCr 20 5 2 is well heatproof, well corrosion resistant, also against diluted sulfuric acid. Opposite to GGL NiSiCr 20 5 3 it possesses improved mechanical characteristics. Application: for pump parts, valves, cast pieces for industrial furnaces with increased mechanical load.PropertiesGeneral

GGG-80, a perlitic cast iron material with nodular garphite, for cast pieces with high strength and hardness, e.g. milling head body, pinion, cast pieces for high wear loadings, e.g. scratch, snail wheel segments for construction machines, meal course segments. The material is comparable to UNS F 36

GGG-70, a predominantly perlitic cast iron material with nudolar graphite, for cast pieces with high strength and hardness, e.g. milling head body, pinion, cast pieces for high wear loading, e.g. scratch, snail wheel segments for construction machines, meal course segments as well as parts for eccen

GGG-60, a perlitic-ferritic cast iron material for cast pieces for static and dynamic loading in machines and construction of vehicles as well as in the machine tool manufacture, in civil engineering and energy industry with increased strength and wear-resisting quality, crankshafts, wheel hubs, bra

GGG-50, a ferritic-perlitic cast iron material with nodular cast iron for cast pieces for static and dynamic loadings in the construction of vehicles, in civil engineering and plastics processing, in the machine tool manufacture, in mechanical engineering, manufacture of fittings, energy mechanical

GGG-40, a ferritic cast iron material with nodular cast iron for cast pieces for high performance with the mechanical treatment as well as for cast pieces with high strain at rupture and impact energy for static and dynamic loadings in the construction of vehicles, building of ships, in civil engine

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.6 - 7.8 g/cm³Typical for Ferritic Stainless SteelMechanicalPropertyTemperatureValueCommentCharpy impact energy23.0 °C40 JElastic modulus23.0 °C220 GPaTypical for Ferritic Stainless SteelElongation A5023.0 °C18 %Hardness, Brinell23.0 °C2

PropertiesGeneralPropertyValueCommentDensity2.65 - 2.7 g/cm³Typical for Wrought 5000 Series AluminiumMechanicalPropertyValueConditionRelated StandardsShapeCommentElastic modulus69.0 - 70.0 GPaTypical for Wrought 5000 Series AluminiumPlane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought

PropertiesGeneralPropertyValueCommentDensity2.65 - 2.7 g/cm³Typical for Wrought 5000 Series AluminiumMechanicalPropertyValueConditionRelated StandardsShapeCommentElastic modulus69.0 - 70.0 GPaTypical for Wrought 5000 Series AluminiumPlane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.6 - 7.8 g/cm³Typical for Ferritic Stainless SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C220 GPaTypical for Ferritic Stainless SteelElongation A5023.0 °C20 %Hardness, Brinell23.0 °C241 [-]Hardness, Rockwell B23.0

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.6 - 7.8 g/cm³Typical for Ferritic Stainless SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C220 GPaTypical for Ferritic Stainless SteelElongation A5023.0 °C20 %Hardness, Brinell23.0 °C207 [-]Hardness, Rockwell B23.0

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.6 - 7.8 g/cm³Typical for Ferritic Stainless SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C220 GPaTypical for Ferritic Stainless SteelElongation A5023.0 °C18 %Hardness, Brinell23.0 °C241 [-]Hardness, Rockwell B23.0

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.6 - 7.8 g/cm³Typical for Ferritic Stainless SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C220 GPaTypical for Ferritic Stainless SteelElongation A5023.0 °C20 %Hardness, Brinell23.0 °C241 [-]Hardness, Rockwell B23.0

Material CuNi18Zn19Pb1, mat. No. CW408J is an alloy of high strength and hardness. To the comparabel mark CuNi18Zn19Pb1, mat. No. 2.0790, acc. to DIN 17663 : 1983-12 applies: Strength is further increasable due to the high strain hardening capability. The material does not embrittle at low temperat

Material CuNi18Zn19Pb1, mat. No. CW408J is an alloy of high strength and hardness. To the comparabel mark CuNi18Zn19Pb1, mat. No. 2.0790, acc. to DIN 17663 : 1983-12 applies: Strength is further increasable due to the high strain hardening capability. The material does not embrittle at low temperat

Material CuNi12Zn30Pb1, mat. No. CW406J is an alloy of high strength and hardness. To the comparabel mark CuNi12Zn30Pb1, mat. No. 2.0780, acc. to DIN 17663 : 1983-12 applies: Strength is further increasable due to the high strain hardening capability. The material does not embrittle at low temperat