Aluminum JIS 5052 is a non-heat treatable alloy with excellent finishing qualities. JIS 5052 offers better corrosion resistance than most aluminum alloys, especially to salt water and marine atmospheres. This alloy can be readily welded using most common techniques and is in fact offers some of the

JIS 1100 is a soft, non-heat-treatable and low strength alloy that offers strong corrosion resistance. Composed of 99% aluminum and 0.12% copper, JIS 1100 is purest grade of aluminum alloy available commercially.PropertiesGeneralPropertyValueCommentDensity2.7 g/cm³Typical for Wrought 1000 Series Alu

JIS 1100 is a soft, non-heat-treatable and low strength alloy that offers strong corrosion resistance. Composed of 99% aluminum and 0.12% copper, JIS 1100 is purest grade of aluminum alloy available commercially.PropertiesGeneralPropertyValueCommentDensity2.7 g/cm³Typical for Wrought 1000 Series Alu

Aluminum JIS 5052 is a non-heat treatable alloy with excellent finishing qualities. JIS 5052 offers better corrosion resistance than most aluminum alloys, especially to salt water and marine atmospheres. This alloy can be readily welded using most common techniques and is in fact offers some of the

Aluminum JIS 5052 is a non-heat treatable alloy with excellent finishing qualities. JIS 5052 offers better corrosion resistance than most aluminum alloys, especially to salt water and marine atmospheres. This alloy can be readily welded using most common techniques and is in fact offers some of the

Aluminum JIS 5052 is a non-heat treatable alloy with excellent finishing qualities. JIS 5052 offers better corrosion resistance than most aluminum alloys, especially to salt water and marine atmospheres. This alloy can be readily welded using most common techniques and is in fact offers some of the

Aluminum JIS 5005 is a lean aluminum magnesium alloy with low density and excellent thermal conductivity. This medium strength non-heat-treatable alloy is known for its corrosion resistance in alkaline marine situations. Aluminum JIS 5005 is readily machinable, and can be welded using TIG and MIG me

JIS 1100 is a soft, non-heat-treatable and low strength alloy that offers strong corrosion resistance. Composed of 99% aluminum and 0.12% copper, JIS 1100 is purest grade of aluminum alloy available commercially.PropertiesGeneralPropertyValueCommentDensity2.7 g/cm³Typical for Wrought 1000 Series Alu

Steel C60E is suitable for larger parts (heavy forged parts) and high loading in vehicle manufacturing, engine and machine engineering, surface hardening possible (e.g. crankshafts, bolts, transmission parts).As a bright steel product it is used in the form of bars, bright, straight, in different co

Steel C55E is suitable for larger parts in vehicle manufacturing, engine and machine engineering undergoing a surface hardening (e.g. gear wheels, screws, shafts).PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.8 - 7.85 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus-100.0 °C2

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.72 g/cm³H38EN 573-3, EN 1592MechanicalPropertyValueConditionRelated StandardsCommentElastic modulus70.0 GPaH38EN 573-3, EN 1592Plane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought 3000 Series AluminiumPoisson's rati

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.72 g/cm³H36EN 573-3, EN 1592MechanicalPropertyValueConditionRelated StandardsCommentElastic modulus70.0 GPaH36EN 573-3, EN 1592Plane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought 3000 Series AluminiumPoisson's rati

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.72 g/cm³H34EN 573-3, EN 1592MechanicalPropertyValueConditionRelated StandardsCommentElastic modulus70.0 GPaH34EN 573-3, EN 1592Plane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought 3000 Series AluminiumPoisson's rati

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.72 g/cm³H25EN 573-3, EN 541MechanicalPropertyValueConditionRelated StandardsCommentElastic modulus70.0 GPaH25EN 573-3, EN 541Plane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought 3000 Series AluminiumPoisson's ratio0

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.73 g/cm³H244EN 573-3, EN 1386MechanicalPropertyValueConditionRelated StandardsCommentBending angle 90°1.25 °/tH244EN 573-3, EN 13861.5 °/tH244EN 573-3, EN 13862.5 °/tH244EN 573-3, EN 1386Elastic modulus69.5 GPaH244EN 573-3, EN 1386Plan

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.73 g/cm³H224EN 573-3, EN 1386MechanicalPropertyValueConditionRelated StandardsCommentBending angle 90°1.25 °/tH224EN 573-3, EN 13861.5 °/tH224EN 573-3, EN 13862.5 °/tH224EN 573-3, EN 1386Elastic modulus69.5 GPaH224EN 573-3, EN 1386Plan

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.73 g/cm³H112EN 573-3, EN 485, EN 755MechanicalPropertyValueConditionRelated StandardsCommentElastic modulus69.5 GPaH112EN 573-3, EN 485, EN 755Hardness, Brinell28.0 [-]H112EN 573-3, EN 48534.0 [-]H112EN 573-3, EN 485Plane-Strain Fractu

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.71 g/cm³H12EN 573-3, EN 4852.72 g/cm³H12EN 573-3, EN 485MechanicalPropertyValueConditionRelated StandardsCommentBending angle 180°1.5 °/tH12EN 573-3, EN 485Elastic modulus69.0 GPaH12EN 573-3, EN 48570.0 GPaH12EN 573-3, EN 485Hardness,

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.71 g/cm³H111EN 573-3, EN 4852.72 g/cm³H111EN 573-3, EN 485MechanicalPropertyValueConditionRelated StandardsCommentBending angle 180°0.5 °/tH111EN 573-3, EN 485Elastic modulus69.0 GPaH111EN 573-3, EN 48570.0 GPaH111EN 573-3, EN 485Hardn

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.7 g/cm³H112EN 573-3, EN 485MechanicalPropertyValueConditionRelated StandardsCommentElastic modulus70.0 GPaH112EN 573-3, EN 485Plane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought 1000 Series AluminiumPoisson's ratio