Electrical welded tubes made of the non-alloy quality steel P265NL, which is low temperature resistant, are used first of all in the apparatus construction, reservoir construction, pipeline construction as well as in the general mechanical engineering and device construction. The weldability is give

Electrical welded tubes made of the non-alloy quality steel P215NL, which is low temperature resistant, are used first of all in the apparatus construction, reservoir construction, pipeline construction as well as in the general mechanical engineering and device construction. The weldability is give

Cold rolled uncoated low carbon steel narrow strip for cold forming.PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A5020.0 °C40

Cold rolled uncoated low carbon steel narrow strip for cold forming.PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A5020.0 °C36

KSt 44-2 is used as grade for roll forming to shape. Its used for welded constructions up to - 25 °C.PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Ca

S235JRG2C is used for folding, section cold forming and cold drawing grade. The steel is applicable for welding constructions of dynamic strain up to -20 °C subject to the load. Mechanical properties in thickness direction have to comply with EURONORM 164 by arrangement. Max. product thickness amoun

Cryogenic Ni-alloy steel for pressure vessel construction, refrigerators, transmission parts and for construction parts in machine and apparatus engineering up to -196 °C.PropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity20 °C7.88 g/cm³normalized, normalized and tempered

Cryogenic Ni-alloy steel for pressure vessel construction, refrigerators, transmission parts and for construction parts in machine and apparatus engineering up to -196 °C.PropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity20 °C7.88 g/cm³quenched and tempered (+QT)EN 10028

Weldable fine grain steel (unalloyed quality steel) for application in steam boiler and pressure vessel construction.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.84 - 7.85 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus-100.0 °C217 GPa20.0 °C212 GPa100.0 °C207 GPa200.0 °C19

The steel C125S is used as cold rolled strip for springs and special applications in thicknesses of up to 6 mm and as tempered cold strip in thicknesses from 0.30 to 3.00 mm. The springs made of steel C125S are suitable for highly stressed tension springs, especially in the watch industry, as well a

RoSt 44-3 is used for the manufacturing of welded tubes. Its applicated as fine-grained steel for dynamic loaded welded constructions up to - 20°C.PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic

RSt 37-2 Cu 3 is used for welded constructions stress dependent up to - 25 °C. It shows a better corrosion behaviour because of the Cu content.PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic mod

AA 7178, comprised of copper and magnesium as its primary alloying elements, offers uncompromising strength and accommodates a number of different metalworking processes. These processes include machining, welding, and heat treating.PropertiesGeneralPropertyValueCommentDensity2.7 - 2.85 g/cm³Typical

AA 7075 is a high-strength alloy that offers good stress-corrosion cracking resistance. Known as a mainstay in the aerospace industry since it was introduced, Aluminum 7075 brings moderate toughness as well as an excellent strength-to-weight ratio. It is also important to note that at sub-zero tempe

AA 7050 is a heat treatable alloy that has very high mechanical properties and high fracture toughness. Popular with the aerospace industry, AA 7050 offers good stress and corrosion cracking resistance and high strength at subzero temperatures.PropertiesGeneralPropertyValueCommentDensity2.7 - 2.85 g

AA 7050 is a heat treatable alloy that has very high mechanical properties and high fracture toughness. Popular with the aerospace industry, AA 7050 offers good stress and corrosion cracking resistance and high strength at subzero temperatures.PropertiesGeneralPropertyValueCommentDensity2.7 - 2.85 g

AA 6061 is a readily available alloy that has good surface finish and ability to be anodized.Easy of weldability and brazability with nice surface finish. Resistance to corrosion from seawater and atmospheric conditions. Suitable for hot forging.PropertiesGeneralPropertyValueConditionRelated Standar

Aluminum Alloy AA 2219, an age-hardenable alloy is produced with a copper additive. It is well-known for its excellent structural strength and it’s used for numerous high temperature applications. It is a suitable alloy for many metalworking processes including machining, forming, heat treatment,

Aluminum AA 2024, known for its use in aircraft industry, is an alloy that offers excellent strength. When in the annealed condition it is readily formed and has good machinability. Though it has a relatively low level of corrosion resistance, it can be machined to a high finish.PropertiesGeneralPro

Aluminum AA 2017 is a heat treatable wrought alloy that offers decent strength, ductility, and good machinability. Aluminum AA 2017 offers more strength than Aluminum 2011, and has fair workability and corrosion resistance. As with many aluminum alloys, Aluminum AA 2017 should not be welded as it re