Very high mechanical properties, very good resistance to sea-water corrosion and to oxidation, good impact and fatigue resistance, no sparks on impact, strictly amagnetic.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.6 g/cm³MechanicalPropertyTemperatureValueElastic modulus23.0 °C145 GPaEl

Very high mechanical properties, very good resistance to sea-water corrosion and to oxidation, good impact and fatigue resistance, no sparks on impact, strictly amagnetic.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.6 g/cm³MechanicalPropertyTemperatureValueElastic modulus23.0 °C145 GPaEl

Hardiall® is a wrought spinodally hardened copper alloy CuNi15Sn8 (C72900) designed for high strength applications where toughness is required. It is non-magnetic and resists mechanical wear, galling, stress relaxation, corrosion and erosion. It is easily machined into complex components whilst bein

Hardiall® is a wrought spinodally hardened copper alloy CuNi15Sn8 (C72900) designed for high strength applications where toughness is required. It is non-magnetic and resists mechanical wear, galling, stress relaxation, corrosion and erosion. It is easily machined into complex components whilst bein

DIFENDER 450 is an alloyed, high strength quenched and tempered steel with a resistance against bullet and fragments impacts and the effects of blast. PropertiesGeneralPropertyValueCarbon equivalent noteTypical values for carbon equivalent (CEV) can be submitted upon request.MechanicalPropertyTemper

DIFENDER 500 is an alloyed, high strength quenched and tempered steel with a resistance against bullet and fragments impacts and the effects of blast. It is preferably used for light weight armoured vehicles. PropertiesGeneralPropertyValueCarbon equivalent noteTypical values for carbon equivalent (C

The UGI® 4313 grade is a low-carbon nickel-alloyed martensitic stainless steel which combines high mechanical properties, good impact strength and a corrosion resistance superior to that of conventional martensitic stainless steel grades with a high C content. It can be used between -60°C and +300°C

UGI 4418 AIR stainless steel is a low-carbon super-martensitic grade with the addition of nickel. It is specifically designed for the aerospace market. It combines high mechanical strength with excellent resilience and very good corrosion resistance, considerably higher than those of conventional hi

UGIPERM® 12FM is a free-machining ferritic stainless steel containing 12% chromium and an addition of silicon. This grade, which was developed for magnetic applications, has high permeability and a particularly low coercive field. It is specially designed for the manufacture of electromechanical ac

Superior strength, heat treatable material Use the URL below for more information: Gränges productsPropertiesDimensionPropertyValueDimensions<p>Standard process capabilities:</p> <p>Width: 10-1400mm</p> <p>Thickness 0.050-3.18mm</p>MechanicalPropertyValueCommentT

2.1293 is a precipitation hardening copper-base alloy. In the heat treated condition, this alloy retains the mechanical properties together with a good ductility in the range of 300-500°C. High electrical conductivity and high mechanical properties are attributes of this versatile alloy.PropertiesGe

2.1293 is a precipitation hardening copper-base alloy. In the heat treated condition, this alloy retains the mechanical properties together with a good ductility in the range of 300-500°C. High electrical conductivity and high mechanical properties are attributes of this versatile alloy.PropertiesGe

2.1293 is a precipitation hardening copper-base alloy. In the heat treated condition, this alloy retains the mechanical properties together with a good ductility in the range of 300-500°C. High electrical conductivity and high mechanical properties are attributes of this versatile alloy.PropertiesGe

2.1293 is a precipitation hardening copper-base alloy. In the heat treated condition, this alloy retains the mechanical properties together with a good ductility in the range of 300-500°C. High electrical conductivity and high mechanical properties are attributes of this versatile alloy.PropertiesGe

AMPCOLOY® 940 is a patented alloy which meets the demands of users of the RWMA class 3 alloys without beryllium. In the industrialized countries, stricter health and safety instructions on the use of noxious elements have forced AMPCO METAL to develop this new alloy. It replaces the AMPCOLOY® 95 in

2.1247 is a 2 % beryllium copper alloy which displays very high mechanical properties with a reasonably good electrical and thermal conductivity.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.26 g/cm³Recycled Content80 %MechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C126 GPa

2.1247 is a 1.9 % beryllium copper alloy which displays very high mechanical properties with a reasonably good electrical and thermal conductivity.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.26 g/cm³Recycled Content80 %MechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C128 G

2.1247 is a 1.9 % beryllium copper alloy which displays very high mechanical properties with a reasonably good electrical and thermal conductivity.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.26 g/cm³Recycled Content80 %MechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C131 G

Chromium is a lightweight blue-silvery white metal. The name chromium comes from the Greek chroma and means color.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C7.15 g/cm³Molar mass52 g/molMechanicalPropertyTemperatureValueElastic modulus23.0 °C290 GPaHardness, Vickers, 1023.0 °C180 - 250 [-

Extra High Strength SteelPropertiesGeneralPropertyValueCommentCarbon equivalent (CEV)0.43 [-]for t ≤ 50 mm plate thickness condition TM0.44 [-]for t ≤ 50 mm sections condition TM0.45 [-]for 50 < t ≤100 mm plate thickness condition TM0.45 [-]for t ≤ 50 mm plate thickness condition QT0.46 [-]for t