The alloy is characterised by a good corrosion resistance. It is sea water steady and resistant to saline atmosphere. The Mg content increases the strength, but the cold forming capacity decreases. The material is nature hard, i.e. only by a cold forming and not by a purposeful heat treatment a stre

The alloy is characterised by a good corrosion resistance. It is sea water steady and resistant to saline atmosphere. The Mg content increases the strength, but the cold forming capacity decreases. The material is nature hard, i.e. only by a cold forming and not by a purposeful heat treatment a stre

DIN 3.3211 is a readily available alloy that has good surface finish and ability to be anodized.Easy of weldability and brazability with nice surface finish. Resistance to corrosion from seawater and atmospheric conditions. Suitable for hot forging.PropertiesGeneralPropertyValueConditionRelated Stan

DIN 3.3211 is a readily available alloy that has good surface finish and ability to be anodized.Easy of weldability and brazability with nice surface finish. Resistance to corrosion from seawater and atmospheric conditions. Suitable for hot forging.PropertiesGeneralPropertyValueCommentDensity2.7 g/c

DIN 3.3211 is a readily available alloy that has good surface finish and ability to be anodized.Easy of weldability and brazability with nice surface finish. Resistance to corrosion from seawater and atmospheric conditions. Suitable for hot forging.PropertiesGeneralPropertyValueCommentDensity2.7 g/c

DIN 3.3211 is a readily available alloy that has good surface finish and ability to be anodized.Easy of weldability and brazability with nice surface finish. Resistance to corrosion from seawater and atmospheric conditions. Suitable for hot forging.PropertiesGeneralPropertyValueCommentDensity2.7 g/c

DIN 3.3211 is a readily available alloy that has good surface finish and ability to be anodized.Easy of weldability and brazability with nice surface finish. Resistance to corrosion from seawater and atmospheric conditions. Suitable for hot forging.PropertiesGeneralPropertyValueCommentDensity2.7 g/c

Hardiall® is a wrought spinodally hardened copper alloy CuNi15Sn8 (C72900) designed for high strength applications where toughness is required. It is non-magnetic and resists mechanical wear, galling, stress relaxation, corrosion and erosion. It is easily machined into complex components whilst bein

Hardiall® is a wrought spinodally hardened copper alloy CuNi15Sn8 (C72900) designed for high strength applications where toughness is required. It is non-magnetic and resists mechanical wear, galling, stress relaxation, corrosion and erosion. It is easily machined into complex components whilst bein

Hardiall® is a wrought spinodally hardened copper alloy CuNi15Sn8 (C72900) designed for high strength applications where toughness is required. It is non-magnetic and resists mechanical wear, galling, stress relaxation, corrosion and erosion. It is easily machined into complex components whilst bein

Hardiall® is a wrought spinodally hardened copper alloy CuNi15Sn8 (C72900) designed for high strength applications where toughness is required. It is non-magnetic and resists mechanical wear, galling, stress relaxation, corrosion and erosion. It is easily machined into complex components whilst bein

Connectivity and free-machining alloy. Unleaded brass with Pb content <1000ppm cold and hot forming capability, good machinability.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.3 g/cm³DimensionPropertyValueDimensionsAvailable size round products (mm): 1-20MechanicalPropertyTemperatureVal

Silicon aluminium bronze alloy with good corrosion resistance and machining properties coupled with low magnetic permeability.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C7.8 g/cm³MechanicalPropertyTemperatureValueElastic modulus23.0 °C124 GPaElongation23.0 °C30 - 40 %Hardness, Brinell23.0

Naturally hard AlMg alloy. The alloy is food safe.PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.67 g/cm³H48EN 573-3, EN 541MechanicalPropertyTemperatureValueConditionRelated StandardsShapeCommentElastic modulus69.0 - 70.0 GPaTypical for Wrought 5000 Series AluminiumPlane-Strain Fr

Naturally hard AlMg alloy. The alloy is food safe.PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.67 g/cm³H44EN 573-3, EN 541MechanicalPropertyTemperatureValueConditionRelated StandardsShapeCommentElastic modulus69.0 - 70.0 GPaTypical for Wrought 5000 Series AluminiumPlane-Strain Fr

The material, that not in the standard 573-3: 2003-10 (chemical composition of aluminum and aluminum alloys) are contained, find for rolled products for covers and dose lower parts use.PropertiesGeneralPropertyValueConditionRelated StandardsShapeDensity2.71 g/cm³H29EN 573-3, EN 541Strip, Sheet, Plat

Material EN AW-Al Si2Mn is produced for sheet, strip and plates. The alloy is food-safe.PropertiesGeneralPropertyValueConditionRelated StandardsShapeDensity2.71 g/cm³H111EN 573-3, EN 485Strip, Sheet, PlateMechanicalPropertyTemperatureValueConditionRelated StandardsShapeCommentElastic modulus69.0 - 7

Naturally hard AlMn alloy. The alloy is not food safe.PropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity2.71 g/cm³FEN 573-3, EN 485Strip, Sheet, Plate2.72 g/cm³FEN 573-3, EN 485Strip, Sheet, Plate20.0 °C2.71 g/cm³FEN 573-3FlatMechanicalPropertyTemperatureValueConditionRe

Naturally hard AlMn alloy. The alloy is food safe.PropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity2.72 g/cm³FEN 573-3, EN 485Strip, Sheet, Plate, Welded Tube20.0 °C2.72 g/cm³FEN 573-3FlatMechanicalPropertyTemperatureValueConditionRelated StandardsShapeCommentElastic mo

Naturally hard AlMn alloy. The alloy is food safe.PropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity2.72 g/cm³FEN 573-3, EN 485Strip, Sheet, Plate, Foil, Welded Tube20.0 °C2.72 g/cm³FEN 573-3FlatMechanicalPropertyTemperatureValueConditionRelated StandardsShapeCommentElas