High temperature steel for the steam and pressure vessel construction. Max. operating temperature: 530 °C, also in the nuclear engineering. Application: collectors, distributor, flanges, shapesPropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.84 - 7.85 g/cm³MechanicalPropertyTemperatureValue

Aluminum IS 63400 is an architectural alloy that offers users a high resistance to corrosion and excellent finishing characteristics. Easy to extrude with fair machinability, IS 63400 can be both hot and cold formed and is commonly available as T6 temper as well as T4 temper.PropertiesGeneralPropert

Steel C22E is suitable for low strained components of higher dimensions (heavy forged parts) and more complex forms as well as higher demands on uniformity of qualities and surface appearance in vehicle and machine engineering (e.g. transmission parts, crankshafts).PropertiesGeneralPropertyTemperatu

Steel C45 is suitable for medium loaded components in vehicle manufacturing, engine and machine engineering (e.g. gear shafts, gear wheels, clutch parts).PropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity20 °C7.8 g/cm³normalized or normalized formed (+N)ISO 683-1, EN 100

Steel C15R is suitable for parts in vehicle and machine engineering with a slightly higher core strength that are predominantly wear loaded (e.g. levers, joints, gear wheels). The steel shows an enhanced workability due to its controlled S-content. Lowest application temperature -25°C, most favorabl

Steel C15 is suitable for parts of slightly higher core strength in vehicle and machine engineering, that are predominantly wear loaded (e.g. levers, joints, nuts, gear wheels). Lowest application temperature -25 °C, most favorable application area 5 to 10 mm nominal size. As a bright steel product

Steel C10 is suitable for parts of low core strength in vehicle and machine engineering, that are predominantly wear loaded (e.g. full dog points, levers, compression moldings and stamped parts). Lowest application temperature -25 °C, most favorable application area 5 to 10 mm nominal size. As a bri

The steel P355NH is a high temperature steel. Application: use in pressure vessel engineering.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.83 - 7.85 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus-100.0 °C217 GPa20.0 °C212 GPa100.0 °C207 GPa200.0 °C199 GPa300.0 °C192 GPa400

The steel P355GH is a high temperature steel. Application: use in steam boiler and pressure vessel engineering.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.82 - 7.85 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus-100.0 °C217 GPa20.0 °C212 GPa100.0 °C207 GPa200.0 °C199 GPa3

The steel P275NH is a high temperature steel. Application: use in pressure vessel engineering.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.85 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus-100.0 °C217 GPa20.0 °C212 GPa100.0 °C207 GPa200.0 °C199 GPa300.0 °C192 GPa400.0 °C18

DIN 3.3211 is a readily available alloy that has good surface finish and ability to be anodized.Easy of weldability and brazability with nice surface finish. Resistance to corrosion from seawater and atmospheric conditions. Suitable for hot forging.PropertiesGeneralPropertyValueConditionRelated Stan

DIN 3.3211 is a readily available alloy that has good surface finish and ability to be anodized.Easy of weldability and brazability with nice surface finish. Resistance to corrosion from seawater and atmospheric conditions. Suitable for hot forging.PropertiesGeneralPropertyValueConditionRelated Stan

DIN 3.3211 is a readily available alloy that has good surface finish and ability to be anodized.Easy of weldability and brazability with nice surface finish. Resistance to corrosion from seawater and atmospheric conditions. Suitable for hot forging.PropertiesGeneralPropertyValueConditionRelated Stan

The high temperature material has good casting capabilities. Due to the hot cracking tendency limited suitability for investment casting.Application: gear boxes, air inletsPropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity2.84 g/cm³T6WL 3.1754Casting20.0 °C2.84 g/cm³T6WL

Aluminum DIN 3.1655 is a popular age-hardenable alloy known for its free-machining characteristics and mechanical properties. It can be machined to very close tolerances while still maintaining a smooth and bright finish. Unlike other aluminum alloys, DIN 3.1655 does not offer good corrosion resista

Aluminum DIN 3.1655 is a popular age-hardenable alloy known for its free-machining characteristics and mechanical properties. It can be machined to very close tolerances while still maintaining a smooth and bright finish. Unlike other aluminum alloys, DIN 3.1655 does not offer good corrosion resista

Aluminum DIN 3.1655 is a popular age-hardenable alloy known for its free-machining characteristics and mechanical properties. It can be machined to very close tolerances while still maintaining a smooth and bright finish. Unlike other aluminum alloys, DIN 3.1655 does not offer good corrosion resista

Aluminum DIN 3.1355, known for its use in aircraft industry, is an alloy that offers excellent strength. When in the annealed condition it is readily formed and has good machinability. Though it has a relatively low level of corrosion resistance, it can be machined to a high finish.PropertiesGeneral

Aluminum DIN 3.1355, known for its use in aircraft industry, is an alloy that offers excellent strength. When in the annealed condition it is readily formed and has good machinability. Though it has a relatively low level of corrosion resistance, it can be machined to a high finish.PropertiesGeneral

Aluminum DIN 3.1355, known for its use in aircraft industry, is an alloy that offers excellent strength. When in the annealed condition it is readily formed and has good machinability. Though it has a relatively low level of corrosion resistance, it can be machined to a high finish.PropertiesGeneral