Spray formed aluminium alloy with good wear resistance. Available in Round bars, Flat plates, Customer specifications. Use the URL below for more information: DISPAL AlloysPropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.66 g/cm³MechanicalPropertyTemperatureValueElastic modulus23.0 °C95

Spray formed aluminium alloy with good wear resistance. Available in Round bars, Flat plates, Customer specifications. Use the URL below for more information: DISPAL AlloysPropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.66 g/cm³MechanicalPropertyTemperatureValueElastic modulus23.0 °C85

Spray formed aluminium alloy with high temperature strength. Available in Round bars, Flat plates, Customer specifications. Use the URL below for more information: DISPAL AlloysPropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.78 g/cm³MechanicalPropertyTemperatureValueElastic modulus23.0

Spray formed aluminium alloy with high strength, fatigue and wear resistance. Available in Round bars, Flat plates, Customer specifications. Use the URL below for more information: DISPAL AlloysPropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.79 g/cm³MechanicalPropertyTemperatureValueEla

Spray formed aluminium alloy with high strength, fatigue and wear resistance. Available in Round bars, Flat plates, Customer specifications. Use the URL below for more information: DISPAL AlloysPropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.79 g/cm³MechanicalPropertyTemperatureValueEla

Spray formed aluminium alloy with lowest thermal expansion Available in Round bars, Flat plates, Customer specifications. Use the URL below for more information: DISPAL AlloysPropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.58 g/cm³MechanicalPropertyTemperatureValueElastic modulus23.0 °C

Spray formed aluminium alloy with lowest density. Available in Round bars, Flat plates, Customer specifications. Use the URL below for more information: DISPAL AlloysPropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.54 g/cm³MechanicalPropertyTemperatureValueElastic modulus23.0 °C80 GPaElo

Spray formed aluminium alloy with lowest density. Available in Round bars, Flat plates, Customer specifications. Use the URL below for more information: DISPAL AlloysPropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.54 g/cm³MechanicalPropertyTemperatureValueElastic modulus23.0 °C85 GPaElo

Excellent surface finishing properties (bright, anodizing, etching, ...) and corrosion resistance.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C2.7 g/cm³MechanicalPropertyTemperatureValueElastic modulus23.0 °C70 GPaShear modulus23.0 °C26.5 GPaThermalPropertyTemperatureValueCommentCoefficien

Printdur® Powderfort (~1.2709) is a precipitation-hardening tool steel that shows the following properties: Good processability with LPBF. High yield and tensile strength combined with good toughness. Simple and distortion-free heat treatment. High hardness of approx. 52 HRC after heat treatment.

This steel is thermomechanically rolled (M) or normalised (N). Our products are studied to improve workability and weldability.PropertiesGeneralPropertyValueCommentCarbon equivalent (CEV)0.41 [-]Indicative value | ProductWeld cracking parameter0.21 [-]ProductCarbon equivalent noteCEV = C + Mn/6 + (C

This steel is thermomechanically rolled (M) or normalised (N). Our products are studied to improve workability and weldability.PropertiesGeneralPropertyValueCommentCarbon equivalent (CEV)0.43 [-]ProductWeld cracking parameter0.24 [-]ProductCarbon equivalent noteCEV = C + Mn/6 + (Cr+Mo+V)/5 + (Cu+Ni)

This steel is thermomechanically rolled (M) or normalised (N). Our products are studied to improve workability and weldability.PropertiesGeneralPropertyValueCommentCarbon equivalent (CEV)0.43 [-]ProductWeld cracking parameter0.24 [-]ProductCarbon equivalent noteCEV = C + Mn/6 + (Cr+Mo+V)/5 + (Cu+Ni)

This steel is thermomechanically rolled (M) or normalised (N). Our products are studied to improve workability and weldability.PropertiesGeneralPropertyValueCommentCarbon equivalent (CEV)0.43 [-]ProductWeld cracking parameter0.24 [-]ProductCarbon equivalent noteCEV = C + Mn/6 + (Cr+Mo+V)/5 + (Cu+Ni)

This steel is thermomechanically rolled (M) or normalised (N). Our products are studied to improve workability and weldability.PropertiesGeneralPropertyValueCommentCarbon equivalent (CEV)0.43 [-]ProductWeld cracking parameter0.24 [-]ProductCarbon equivalent noteCEV = C + Mn/6 + (Cr+Mo+V)/5 + (Cu+Ni)

Non-oriented fully processed electrical steel have guaranteed magnetic properties, in accordance with (or exceeding the levels required by) EN 10106:2015. As well as the maximum loss and minimum polarisation levels cited, full magnetic characterisation curves regarding losses, polarisation, permeabi

Quenchable boron steel represent a breakthrough in heat treatment technology. This steel uses boron as a hardening agent. The melting and refining process, together with thermomechanical treatment by controlled hot rolling, allow ArcelorMittal quenchable boron steel to attain a remarkable degree of

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelPoisson's ratio23.0 °C0.29 [-]Typical for Low Carbon SteelShear modulus23.0 °C82 GPaTy

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelPoisson's ratio23.0 °C0.29 [-]Typical for Low Carbon SteelShear modulus23.0 °C82 GPaTy

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelPoisson's ratio23.0 °C0.29 [-]Typical for Low Carbon SteelShear modulus23.0 °C82 GPaTy