The material G24Mn6 is suitable for fusion welding and is considered to have a good weldability, since it has been successfully used with good results in cast - welded constructions, especially in combination with rolling mill and forged products made from quenchhardened high-strength fine-grain str

High tensile strength, high fatigue resistancePropertiesGeneralPropertyTemperatureValueDensity23.0 °C7.8 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C190 GPaElongation A5023.0 °C12 %Hardness, Brinell23.0 °C190 [-]Poisson's ratio23.0 °C0.29 [-]Typical for High Carbon Steel

PropertiesGeneralPropertyTemperatureValueCommentDensity20.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus20.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A520.0 °C17 %Impact strength, Charpy notched-50.0 °C27 kJ/m²Poisson's ratio

Cold-rolled narrow strip made of the mild steel C22E will be delivered in thicknesses up to 6 mm for quenching and tempering in following conditions: - soft annealed or soft annealed and little rerolled (+A or +LC), - cold rolled (+CR). The delivery condition annealed to globular carbides (+AC) can

Cold-rolled narrow strip made of the mild steel C15E will be delivered in thicknesses up to 10 mm for case hardening in following conditions: - soft annealed or soft annealed and little rerolled (+A or +LC), - cold rolled (+CR).PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.85 g/cm³Mechani

Cold-rolled narrow strip made of the mild steel C10E will be delivered in thicknesses up to 10 mm for case hardening in following conditions: - soft annealed or soft annealed and little rerolled (+A or +LC), - cold rolled (+CR).PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.85 g/cm³Mechani

As a bright steel product it is used in the form of bars, bright, straight, in various conditions (see DIN EN 10277 : 1999-10).PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 -

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C20 %Elongation A5023.0 °C20 %Poisson's ratio23.0 °C0.29 [-]Typical fo

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C20 %Elongation A5023.0 °C20 %Poisson's ratio23.0 °C0.29 [-]Typical fo

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C20 %Elongation A5023.0 °C20 %Poisson's ratio23.0 °C0.29 [-]Typical fo

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C20 %Elongation A5023.0 °C20 %Poisson's ratio23.0 °C0.29 [-]Typical fo

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C20 %Elongation A5023.0 °C20 %Poisson's ratio23.0 °C0.29 [-]Typical fo

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C28 %Elongation A5023.0 °C28 %Poisson's ratio23.0 °C0.29 [-]Typical fo

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C27 %Elongation A5023.0 °C27 %Poisson's ratio23.0 °C0.29 [-]Typical fo

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C28 %Elongation A5023.0 °C28 %Poisson's ratio23.0 °C0.29 [-]Typical fo

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C27 %Elongation A5023.0 °C27 %Poisson's ratio23.0 °C0.29 [-]Typical fo

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C28 %Elongation A5023.0 °C28 %Poisson's ratio23.0 °C0.29 [-]Typical fo

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C27 %Elongation A5023.0 °C27 %Poisson's ratio23.0 °C0.29 [-]Typical fo

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C28 %Elongation A5023.0 °C28 %Poisson's ratio23.0 °C0.29 [-]Typical fo

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C27 %Elongation A5023.0 °C27 %Poisson's ratio23.0 °C0.29 [-]Typical fo