Metal | Industrial manufacturing

EN 10277-2 Grade S235JRG2C – Premium Cold‑Formed & Folding Steel (±SH)
S235JRG2C is used for folding, cold forming and cold drawing grade. The steel is applicable for welding constructions of temperatures up to -20°C depending on load. Max. product thickness accounts 20 mm for folding grades and 8 mm for cold forming grades. As a bright steel product it is used in the
EN 10277-2 Grade C16 Cold-Drawn Bar Steel – High Strength & Precision
As a bright steel product it is used in the form of bars, bright, straight, in various conditions (see DIN EN 10277 : 1999-10).PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 -
EN 10270-1 Grade SH Cold-Drawn Steel Wire – Ideal for High Static Load Springs
The patented cold drawn steel wire type SH (S-static load H-high tensile strength) made of unalloyed steel is used for tension springs, compression springs or torsion springs for high static load or low dynamic load. The wire will be delivered in rings (standard delivery type), coils or levelled ba
EN 10270-1 Grade DM: Patented Cold-Drawn Steel Wire for Springs
The patented cold drawn steel wire type DM (D-dynamic load M-medium tensile strength) made of unalloyed steel is used for tension springs, compression springs or torsion springs for medium static load or rare dynamic load. The wire will be delivered in rings (standard delivery type), coils or level
EN 10270-1 Grade DH: Patented Cold-Drawn Steel Wire for High-Performance Springs
The patented cold drawn steel wire type DH (D-dynamic load H-high tensile strength) made of unalloyed steel is used for tension springs, compression springs or torsion springs for high static load or medium dynamic load. The wire will be delivered in rings (standard delivery type), coils or levelle
EN 10269 Grade 19MnB4: Advanced Annealing for Spheroidized Carbides (+AC)
The cold upsettable steel 19MnB4 is cold formable in hard rolled condition at low and mean deforming degrees and in heat trated condition GKZ resp. K+GKZ+K cold formable at high deformation degrees. Application in unnealed condition for outside hexagonal screws of strength category 8.8 in a small an
EN 10268 Grade H240LA Skin Pass – High‑Tensile, Cold‑Formable Steel
H240LA, mat. No. 1.0480, is a micro alloyed steel with a min. yield strength of 240 N/mm² and a min. ultimate strain of 27%. The material is well cold formable. The mandrel diameter at bending test min. 180° amounts to 0e for transverse test specimen (e= nominal thickness). Thin sheets made of micr
SAE J1392 Grade 035SH Cold-Rolled & Coated Steel – Superior Low-Carbon Properties
PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C22 %Elongation A5023.0 °C22 %Poisson's ratio23.0 °C0.29 [-]Typical fo
SAE J1392 Grade 035CL Hot-Rolled Steel – Key Properties & Specifications
PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C21 %Elongation A5023.0 °C21 %Poisson's ratio23.0 °C0.29 [-]Typical fo
SAE J1392 Grade 035CL Cold-Rolled & Coated Steel – Properties & Specifications
PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C22 %Elongation A5023.0 °C22 %Poisson's ratio23.0 °C0.29 [-]Typical fo
High-Quality SAE J1392 Grade 035CH Hot-Rolled Low Carbon Steel
PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C21 %Elongation A5023.0 °C21 %Poisson's ratio23.0 °C0.29 [-]Typical fo
SAE J1392 Grade 035CH Cold‑Rolled, Coated Steel – Superior Strength & Durability
PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C22 %Elongation A5023.0 °C22 %Poisson's ratio23.0 °C0.29 [-]Typical fo
SAE J1392 Grade 035BL Hot-Rolled Steel – Key Mechanical and Thermal Properties
PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C21 %Elongation A5023.0 °C21 %Poisson's ratio23.0 °C0.29 [-]Typical fo
SAE J1392 Grade 035BL Cold‑Rolled & Coated Low‑Carbon Steel – High Strength, Durability
PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C22 %Elongation A5023.0 °C22 %Poisson's ratio23.0 °C0.29 [-]Typical fo
SAE J1392 Grade 035BH Hot-Rolled Steel – Premium Low Carbon Material
PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C21 %Elongation A5023.0 °C21 %Poisson's ratio23.0 °C0.29 [-]Typical fo
SAE J1392 Grade 035BH Cold-Rolled, Coated Steel – High Strength, Low Carbon
PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C22 %Elongation A5023.0 °C22 %Poisson's ratio23.0 °C0.29 [-]Typical fo
Premium SAE J1392 Grade 035AL Hot‑Rolled Steel – High Strength & Reliability
PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C21 %Elongation A5023.0 °C21 %Poisson's ratio23.0 °C0.29 [-]Typical fo
SAE J1392 Grade 035AL Cold-Rolled & Coated Low‑Carbon Steel – Key Properties
PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C22 %Elongation A5023.0 °C22 %Poisson's ratio23.0 °C0.29 [-]Typical fo
SAE J1392 Grade 035AH Hot-Rolled Steel – Key Properties & Performance
PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C21 %Elongation A5023.0 °C21 %Poisson's ratio23.0 °C0.29 [-]Typical fo
SAE J1392 Grade 035AH – Premium Cold‑Rolled, Coated Low‑Carbon Steel
PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation23.0 °C22 %Elongation A5023.0 °C22 %Poisson's ratio23.0 °C0.29 [-]Typical fo

Total 9103 -- FirstPage PreviousPage NextPage LastPage CurrentPage:163/456 20--/Page Goto:1 157 158 159 160 161 162 163 164 165 166 167 168 169

Metal