Aluminium Bronze alloy with moderate strength and excellent ductility in combination with good corrosion resistance.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C7.6 g/cm³MechanicalPropertyTemperatureValueElastic modulus23.0 °C116 GPaElongation23.0 °C20 - 32 %Hardness, Brinell23.0 °C155 - 1

Connectivity and free-machining alloy. Machinable copper with very high electrical conductivity. C99® is part of Lebronze alloys’ large offer of machinable high performance alloys for connector applications, along with C97® and C98®.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.3 g/cm³Di

Connectivity and free-machining alloy. Machinable copper with very high electrical conductivity. C99® is part of Lebronze alloys’ large offer of machinable high performance alloys for connector applications, along with C97® and C98®.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.3 g/cm³Di

Connectivity and free-machining alloy. Machinable copper with very high electrical conductivity. C99® is part of Lebronze alloys’ large offer of machinable high performance alloys for connector applications, along with C97® and C98®.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.3 g/cm³Di

Connectivity and free-machining alloy. C97® (C19160) is part of Lebronze alloys’ large offer of machinable high performance alloys for connector applications, along with C98® and C99®. It is a heat-treated leaded nickel copper alloy with high electrical conductivity and machinability. C97® exhibits

DI-TANK 355 is the Dillinger designation of fine grain steels thermo-mechanically rolled (M or TMCP) used for the fabrication of storage tanks for hydrocarbons in the oil and gas industry and complies with the relevant construction codes. The DI-TANK 355 offers four options, in accordance with diffe

DI-TANK 460 is the Dillinger designation of fine grain steels thermo-mechanically rolled (M or TMCP) used for the fabrication of storage tanks for hydrocarbons in the oil and gas industry and complies with the relevant construction codes. DI-TANK 460 HIC is produced in a way to provide an improved r

DI-TANK 420 is the Dillinger designation of fine grain steels thermo-mechanically rolled (M or TMCP) used for the fabrication of storage tanks for hydrocarbons in the oil and gas industry and complies with the relevant construction codes. The DI-TANK offers three options, in accordance with differen

AMPCOLOY® 944 has been developed by AMPCO METAL to obtain an alloy with ultimate thermal conductivity, good tensile strength and very good hardness, in order to provide an alternative to beryllium copper, where stricter health and safety instructions on the use of noxious elements are required.Prope

AMPCOLOY® 944 has been developed by AMPCO METAL to obtain an alloy with ultimate thermal conductivity, good tensile strength and very good hardness, in order to provide an alternative to beryllium copper, where stricter health and safety instructions on the use of noxious elements are required.Prope

Tungsten has the highest melting point of all metals and is therefore also suitable for very high-temperature applications. It is also characterized by a uniquely low coefficient of thermal expansion and a very high level of dimensional stability. PropertiesGeneralPropertyTemperatureValueDensity23.

ASTM F75 (UNS R30075) cobalt alloy Printdur® CoCrF75 can be used in two different application areas: high-temperature applications medical engineering Printdur® CoCrF75 has an excellent resistance to thermal shock in the heat-treated condition and is resistant to oxidizing and reducing atmospheres

Alloy 10 from Materion Performance Alloys provides high electrical and thermal conductivity coupled with moderate strength.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.83 g/cm³DimensionPropertyValueOutside diameter9.5 - 76 mmWall thicknessTypically 10 to 20% of ODMechanicalPropertyTemper

Alloy 10 from Materion Performance Alloys provides high electrical and thermal conductivity coupled with moderate strength.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.83 g/cm³DimensionPropertyValueOutside diameter19.1 - 406 mmWall thicknessTypically 10 to 20% of ODMechanicalPropertyTemp

Alloy 10 from Materion Performance Alloys provides high electrical and thermal conductivity coupled with moderate strength.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.83 g/cm³DimensionPropertyValueOutside diameter9.5 - 76 mmWall thicknessTypically 10 to 20% of ODMechanicalPropertyTemper

Alloy 10 from Materion Performance Alloys provides high electrical and thermal conductivity coupled with moderate strength.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.83 g/cm³DimensionPropertyValueOutside diameter19.1 - 406 mmWall thicknessTypically 10 to 20% of ODMechanicalPropertyTemp

Alloy 3 from Materion Performance Alloys provides high electrical and thermal conductivity coupled with moderate strength.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.83 g/cm³DimensionPropertyValueOutside diameter9.5 - 76 mmWall thicknessTypically 10 to 20% of ODMechanicalPropertyTempera

Alloy 3 from Materion Performance Alloys provides high electrical and thermal conductivity coupled with moderate strength.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.83 g/cm³DimensionPropertyValueOutside diameter19.1 - 406 mmWall thicknessTypically 10 to 20% of ODMechanicalPropertyTempe

Alloy 3 from Materion Performance Alloys provides high electrical and thermal conductivity coupled with moderate strength.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.83 g/cm³DimensionPropertyValueOutside diameter9.5 - 76 mmWall thicknessTypically 10 to 20% of ODMechanicalPropertyTempera

Alloy 3 from Materion Performance Alloys provides high electrical and thermal conductivity coupled with moderate strength.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.83 g/cm³DimensionPropertyValueOutside diameter19.1 - 406 mmWall thicknessTypically 10 to 20% of ODMechanicalPropertyTempe