The steel is used for rail vehicle engineering acc. to the selected standard DIN 5512-1.The corresponding properties of EN 10025-2 shall be taken.PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic

Valid for tube with ribbs- outer diameter of ribbed parts of tubes: 36,0 to 70,0 mm- wall thicknes of ribbed parts of tubes: 1,0 to 8,5 mm- spacing of ribbs: 2,2 to 5,1 mm- high of ribbs: 6,5 to 16 mm- average thickness of ribbs: 0,4 to 1,0 mmMelting:- inductive- gaseous heated melting ovenApplicati

The steel is used for rail vehicle and container engineering acc. to the selected standard DIN 5512-2.The corresponding properties of DIN 1623-2:1986-02 shall be taken.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.83 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus-100.0 °C21

The micro-alloyed, interstitial free steel IF18 is suited for extreme forming demands, e. g. difficult profile shapes and complex parts up to higher sheet thicknesses. The steel is weldable and the base material for - electrolytic coated sheet and strip - hot-dip coated sheet and strip - varnished s

Carpenter VIM VAR Core Iron is a low carbon magnetic iron produced using vacuum induction melting plus vacuum arc re-melting practices. Other elements commonly found in low carbon irons are held as low as possible to ensure good DC magnetic properties. This double melting technique controls the dist

Naturally hard AlMg alloy. The alloy is food safe.PropertiesGeneralPropertyValueConditionRelated StandardsShapeDensity2.68 g/cm³FEN 573-3, EN 485Strip, Sheet, Plate2.69 g/cm³FEN 573-3, EN 485Strip, Sheet, PlateMechanicalPropertyTemperatureValueConditionRelated StandardsShapeCommentElastic modulus69.

Naturally hard AlMg alloy. The alloy is not food safe.PropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity2.71 g/cm³FEN 573-3, EN 485Strip, Sheet, Plate20.0 °C2.7 g/cm³FEN 573-3FlatMechanicalPropertyTemperatureValueConditionRelated StandardsShapeCommentElastic modulus69.0

Naturally hard AlMn alloy. The alloy is food safe.PropertiesGeneralPropertyValueConditionRelated StandardsShapeDensity2.71 g/cm³H48EN 573-3, EN 541Strip, Sheet, PlateMechanicalPropertyTemperatureValueConditionRelated StandardsShapeCommentElastic modulus69.5 - 70.0 GPaTypical for Wrought 3000 Series

Materion Performance Alloys’ Alloy 390E is a copper beryllium alloy that provides a unique combination of high strength, high electrical conductivity, and excellent formability. Copper beryllium alloys are well known for their superior stress relaxation resistance and fatigue strength. This blend of

ToughMet 3 TS alloy is a cold worked, spinodally hardened alloy designed to provide high strength for the most demanding static structural loads and pressures. It provides high toughness combined with high strength to resist dynamic impact loading. ToughMet 3 TS alloy provides galling resistance, hi

ToughMet 3 TS alloy is a cold worked, spinodally hardened alloy designed to provide high strength for the most demanding static structural loads and pressures. It provides high toughness combined with high strength to resist dynamic impact loading. ToughMet 3 TS alloy provides galling resistance, hi

ToughMet 3 TS alloy is a cold worked, spinodally hardened alloy designed to provide high strength for the most demanding static structural loads and pressures. It provides high toughness combined with high strength to resist dynamic impact loading. ToughMet 3 TS alloy provides galling resistance, hi

Materion Performance Alloys Brush 60 is a high performance, lower priced copper beryllium alloy offering cost effective solutions for many applications. Available in mill hardened tempers. As components are reduced in size and signal requirements become more stringent, the selection of materials is

Materion Performance Alloys Brush 60 is a high performance, lower priced copper beryllium alloy offering cost effective solutions for many applications. Available in mill hardened tempers. As components are reduced in size and signal requirements become more stringent, the selection of materials is

Wrought beta brass aerospace alloy, with high mechanical properties, good anti-friction properties, resistance to oxidation.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C7.6 g/cm³MechanicalPropertyTemperatureValueElastic modulus23.0 °C110 GPaElongation23.0 °C7 - 10 %Hardness, Brinell23.0 °C

Connectivity and free-machining alloy. Unleaded brass with Pb content <1000ppm, hot forming capability, good machinability.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.4 g/cm³DimensionPropertyValueDimensionsAvailable size round products (mm): 1-20MechanicalPropertyTemperatureValueElasti

Connectivity and free-machining alloy. Spinodal hardening, ageable alloy with outstanding strength and thermal stress relaxation properties.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.8 g/cm³DimensionPropertyValueDimensionsAvailable size round products (mm): 1-14MechanicalPropertyTempe

Connectivity and free-machining alloy. Spinodal hardening, ageable alloy with outstanding strength and thermal stress relaxation properties.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.8 g/cm³DimensionPropertyValueDimensionsAvailable size round products (mm): 1-14MechanicalPropertyTempe

Connectivity and free-machining alloy. Spinodal hardening, ageable alloy with outstanding strength and thermal stress relaxation properties.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.8 g/cm³DimensionPropertyValueDimensionsAvailable size round products (mm): 1-14MechanicalPropertyTempe

Connectivity and free-machining alloy. Spinodal hardening, ageable alloy with outstanding strength and thermal stress relaxation properties.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.8 g/cm³DimensionPropertyValueDimensionsAvailable size round products (mm): 1-14MechanicalPropertyTempe