Material X2CrTi17 is comparable to X 1 CrTi 15 nach SEW 400 : 1991-02. This material is a stainless steel with an extremely low carbon content for special applications in household, automotive and electrical industry. It is resistant to intercrystalline corrosion both in delivery and welded conditio

Acc. VdTÜV material data sheet 494 : 1996-06 the stainless ferritic steel X 6 CrTi 17, mat. no. 1.4510, is used for longitudinal welded tubes for pressure vessels acc. TRB 100 and AD data sheet W 2 at operating temperatures from - 10 to 280 °C. and pressures up to 50 bar and for type approved hot wa

According to VdTÜV-Wbl 305 : 1999-03, the material NiCr15Fe with the material number 2.4816 is used for pressure vessels according to TRB 100 and, with interpreting the AD-Merkblatt W 2 faithfully to its meaning, for temperatures from -10 to 450 degrees as well as for ranges of applications in nucle

Material X6CrMo17-1 is comparable to X 6 CrMo 17 1 acc. to DIN 17441 : 1985-07. The mirror finishable 17 per cent Cr-steel with Mo-addition has been developped especially for autmotive industry. Increased resistance to media occurring when driving (e.g. road salt). Application for hub caps, bumper,

Material X6CrAl13 is comparable to X 6 CrAl 13 acc. to DIN 17440 : 1985-07. Application predominantly in apparatus engineering for petroleum industry, e.g. for cracking facilities as well as for welded parts in hydroelectric power station building. Addition of aluminium inhibits hardness increase ar

Properties: - modification of 1.4401 - high resistance to not-oxidising chloride containing media - high polishable - able very well for cold forming - elevated corrosion properties, because of its decreased carbon content Application: - for construction in chemical industry, cellulose, textile and

PropertiesGeneralPropertyValueConditionRelated StandardsShapeDensity2.73 g/cm³H244EN 573-3, EN 1386Strip, Sheet, Plate, Foil, Bar, Rod, TubeMechanicalPropertyValueConditionRelated StandardsShapeCommentBending angle 90°1.25 °/tH244EN 573-3, EN 1386Strip, Sheet, Plate, Foil, Bar, Rod, Tube1.5 °/tH244E

PropertiesGeneralPropertyValueConditionRelated StandardsShapeDensity2.73 g/cm³H224EN 573-3, EN 1386Strip, Sheet, Plate, Foil, Bar, Rod, TubeMechanicalPropertyValueConditionRelated StandardsShapeCommentBending angle 90°1.25 °/tH224EN 573-3, EN 1386Strip, Sheet, Plate, Foil, Bar, Rod, Tube1.5 °/tH224E

PropertiesGeneralPropertyValueConditionRelated StandardsShapeDensity2.7 g/cm³H14EN 573-3, EN 1715-2, EN 485Plate, Rod2.705 g/cm³H14EN 573-3, EN 1715-2, EN 485Plate, RodMechanicalPropertyValueConditionRelated StandardsShapeCommentBending angle 180°1.0 °/tH14EN 573-3, EN 485Plate, RodBending angle 90°

Quantity: One truck load – Specialty products on request.Additional services: Via Cindal (the Aludium R&D department): R&D services, benchmarking, chemical audits, material specification, process optimisation, quality monitoring, sample analysis, prototyping, trainingBIKAR-METALLE GMBHMANUFA

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.77 g/cm³T451EN 573-3, EN 485MechanicalPropertyValueConditionRelated StandardsCommentBending angle 90°2.0 °/tT451EN 573-3, EN 4852.5 °/tT451EN 573-3, EN 4853.5 °/tT451EN 573-3, EN 4855.0 °/tT451EN 573-3, EN 485Elastic modulus70.0 GPaT45

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.64 g/cm³H36EN 573-3, EN 754MechanicalPropertyValueConditionRelated StandardsCommentElastic modulus70.0 GPaH36EN 573-3, EN 754Plane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought 5000 Series AluminiumPoisson's ratio0

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.64 g/cm³H26EN 573-3, EN 754MechanicalPropertyValueConditionRelated StandardsCommentElastic modulus70.0 GPaH26EN 573-3, EN 754Plane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought 5000 Series AluminiumPoisson's ratio0

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.64 g/cm³H24EN 573-3, EN 754MechanicalPropertyValueConditionRelated StandardsCommentElastic modulus70.0 GPaH24EN 573-3, EN 754Plane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought 5000 Series AluminiumPoisson's ratio0

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.64 g/cm³H22EN 573-3, EN 754MechanicalPropertyValueConditionRelated StandardsCommentElastic modulus70.0 GPaH22EN 573-3, EN 754Plane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought 5000 Series AluminiumPoisson's ratio0

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.64 g/cm³H16EN 573-3, EN 754MechanicalPropertyValueConditionRelated StandardsCommentElastic modulus70.0 GPaH16EN 573-3, EN 754Plane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought 5000 Series AluminiumPoisson's ratio0

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.64 g/cm³H112EN 573-3, EN 755MechanicalPropertyValueConditionRelated StandardsCommentElastic modulus70.0 GPaH112EN 573-3, EN 755Plane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought 5000 Series AluminiumPoisson's rati

Alloy 165 plate from Materion Performance Alloys provides strength close to that of Alloy 25, with slightly lower beryllium content. This alloy features high fatigue strength and resistance to wear, corrosion, galling, and stress relaxation.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.41

Alloy 165 plate from Materion Performance Alloys provides strength close to that of Alloy 25, with slightly lower beryllium content. This alloy features high fatigue strength and resistance to wear, corrosion, galling, and stress relaxation.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.41

Alloy 165 plate from Materion Performance Alloys provides strength close to that of Alloy 25, with slightly lower beryllium content. This alloy features high fatigue strength and resistance to wear, corrosion, galling, and stress relaxation.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.41