The austenitic steel X3CrNiCu19-9-2 is used in solution annealed condition in the form of rods, wire rod and profiles. It is resistant to intercrystalline corrosion also in sensitized condition.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.9 g/cm³MechanicalPropertyTemperatureValueCommentE

Material X39CrMo17-1 is comparable to X 35 CrMo 17 acc. to SEW 400 : 1991-02. It is a heat treatable Cr-steel with increased corrosion resistance, largely resistant to many organic and inorganic acids, relatively resistant to seawater. Excellent operating characateristics and wear resistance. Applic

PropertiesGeneralPropertyValueConditionRelated StandardsShapeDensity2.75 g/cm³O3EN 573-3, EN 1715-3WireMechanicalPropertyValueConditionRelated StandardsShapeCommentElastic modulus70.0 GPaO3EN 573-3, EN 1715-3WirePlane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought 2000 Series Aluminiu

PropertiesGeneralPropertyValueConditionRelated StandardsShapeDensity2.75 g/cm³OEN 573-3, EN 1715-3WireMechanicalPropertyValueConditionRelated StandardsShapeCommentElastic modulus70.0 GPaOEN 573-3, EN 1715-3WirePlane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought 2000 Series AluminiumP

DIMO 2312 is a hardened CrMnMoS-alloyed tool steel for the construction of plastic molds with lower surface requirements referring to e.g. polishability and photoetchability. DIMO 2312 is characterized by excellent machinability and high dimensional stability. DIMO 2312 is a modified version of 1.23

UGI® 4542 is a PH (Precipitation Hardening) martensitic stainless steel used for parts requiring a combination of high strength, high toughness and good corrosion resistance. This stainless steel is unique in that it not only offers excellent corrosion resistance, comparable to that of type 1.4301/

UGI® 4542 is a PH (Precipitation Hardening) martensitic stainless steel used for parts requiring a combination of high strength, high toughness and good corrosion resistance. This stainless steel is unique in that it not only offers excellent corrosion resistance, comparable to that of type 1.4301/

UGI® 4542 is a PH (Precipitation Hardening) martensitic stainless steel used for parts requiring a combination of high strength, high toughness and good corrosion resistance. This stainless steel is unique in that it not only offers excellent corrosion resistance, comparable to that of type 1.4301/

UGI® 4542 is a PH (Precipitation Hardening) martensitic stainless steel used for parts requiring a combination of high strength, high toughness and good corrosion resistance. This stainless steel is unique in that it not only offers excellent corrosion resistance, comparable to that of type 1.4301/

UGIMA® 4542 is the first UGIMA® steel product from the family of improved machinability, precipitation hardened stainless steels. It is manufactured only by UGITECH. Its properties are identical to those of UGI 4542 except for its machinability which is significantly better than that of UGI 4542: UG

Materion Performance Alloys’ MoldMAX V (MMV) Alloy is a high conductivity, moderately high strength, copper nickel silicon chromium alloy. PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.69 g/cm³DimensionPropertyValueDiameter12.5 - 63.5 mmMechanicalPropertyTemperatureValueCommentCharpy impa

Nickel silver offering an optimal compromise between cold forming and machining, designed and manufactured by Lebronze alloys.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.4 g/cm³MechanicalPropertyTemperatureValueElastic modulus23.0 °C115 GPaElongation23.0 °C3 - 38 %Hardness, Brinell23.0

Nickel silver specially developed for free machining, designed and manufactured by Lebronze alloys.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.4 g/cm³MechanicalPropertyTemperatureValueElastic modulus23.0 °C115 GPaElongation23.0 °C3 - 38 %Hardness, Brinell23.0 °C103 - 216 [-]Hardness, Ro

NB15 is a free-machining nickel silver with very high toughness and high corrosion resistance, designed and manufactured by Lebronze alloys.PropertiesGeneralPropertyTemperatureValueDensity23.0 °C8.65 g/cm³MechanicalPropertyTemperatureValueElastic modulus23.0 °C120 GPaElongation23.0 °C2 - 40 %Hardnes

PropertiesGeneralPropertyTemperatureValueDensity23.0 °C7.8 g/cm³DimensionPropertyValueCommentDiameter20 - 800 mmLength2000 - 5800 mmThickness800 mmmax.Width205 - 800 mmMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 210 GPaTypical for SteelsElongation23.0 °C12 %Hardness, Brinell

PropertiesGeneralPropertyTemperatureValueDensity23.0 °C7.8 g/cm³DimensionPropertyValueCommentLength1000 - 6000 mmThickness800 mmmax.Width205 - 2300 mmMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 210 GPaTypical for SteelsElongation23.0 °C28.2 %Hardness, Brinell23.0 °C156 [-]Po

Application note for rail vehicles (according to DIN 5513 for H111, H112, H12, H22 conditions):- for roof and side walls- observe the decrease in strength in heat affected zone in H112, H12 and H22 conditions- good chemical resistance, good cold formability in the H111, H112 and H22 conditionsThe ma

The steel P460NL2 is a weldable alloy high-grade steel that is especially tough to subzero temperature. Tubes made of this steel are used in the pressure vessel construction, apparatus construction, pipeline construction as well as in the general mechanical engineering and device construction.Proper

The steel P460NL1 is a weldable fine-grain structural steel (alloy high-grade steel) that is tough to subzero temperature. Tubes made of this steel are used in the pressure vessel construction, apparatus construction, pipeline construction as well as in the general mechanical engineering and device

Cold-rolled narrow strip made of the alloy steel 25CrMo4 will be delivered in thicknesses up to 6 mm for quenching and tempering and for quenched and tempered cold strip in thicknesses between 0.3 mm and 3.0 mm in following conditions: - soft annealed or soft annealed and little rerolled (+A or +LC)