PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelDimensionPropertyValueWall thickness1 - 8 mmMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A523.0 °C16 - 30 %Elongation A5, tra

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelDimensionPropertyValueWall thickness1 - 8 mmMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A523.0 °C6 - 20 %Elongation A5, tran

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelDimensionPropertyValueWall thickness1 - 8 mmMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A523.0 °C1 - 15 %Elongation A5, tran

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelDimensionPropertyValueWall thickness1 - 8 mmMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A523.0 °C8 - 23 %Elongation A5, tran

Malleable iron is a cast iron in which the graphite is present as temper carbon nodules, instead of flakes as gray iron or spherulites as in ductile iron. M3210 has good ductility and machinability.PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.2 - 7.34 g/cm³Typical for Malleable Ca

The high temperature alloy steel X14CrMoVNbN10-1 is used for larger preshaped components in the quenched and tempered condition in turbine and generator installations, in particular as shafts and discs. The steel is weldable if the relevant measures required are observed.PropertiesGeneralPropertyTem

The high temperature alloy steel 28CrMoNiV4-9 is used for larger preshaped components in the quenched and tempered condition in turbine and generator installations, in particular as shafts and discs. The steel is weldable if the relevant measures required are observed.PropertiesGeneralPropertyTemper

The high temperature alloy steel 30CrMoNiV5-11 is used for larger preshaped components in the quenched and tempered condition in turbine and generator installations, in particular as shafts and discs. The steel is weldable if the relevant measures required are observed.PropertiesGeneralPropertyTempe

Aluminum JIS 5052 is a non-heat treatable alloy with excellent finishing qualities. JIS 5052 offers better corrosion resistance than most aluminum alloys, especially to salt water and marine atmospheres. This alloy can be readily welded using most common techniques and is in fact offers some of the

JIS 1100 is a soft, non-heat-treatable and low strength alloy that offers strong corrosion resistance. Composed of 99% aluminum and 0.12% copper, JIS 1100 is purest grade of aluminum alloy available commercially.PropertiesGeneralPropertyValueCommentDensity2.7 g/cm³Typical for Wrought 1000 Series Alu

Aluminum JIS 6063 is an architectural alloy that offers users a high resistance to corrosion and excellent finishing characteristics. Easy to extrude with fair machinability, JIS 6063 can be both hot and cold formed and is commonly available as T6 temper as well as T4 temper.PropertiesGeneralPropert

Aluminum JIS 6063 is an architectural alloy that offers users a high resistance to corrosion and excellent finishing characteristics. Easy to extrude with fair machinability, JIS 6063 can be both hot and cold formed and is commonly available as T6 temper as well as T4 temper.PropertiesGeneralPropert

Aluminum JIS 5052 is a non-heat treatable alloy with excellent finishing qualities. JIS 5052 offers better corrosion resistance than most aluminum alloys, especially to salt water and marine atmospheres. This alloy can be readily welded using most common techniques and is in fact offers some of the

JIS 1100 is a soft, non-heat-treatable and low strength alloy that offers strong corrosion resistance. Composed of 99% aluminum and 0.12% copper, JIS 1100 is purest grade of aluminum alloy available commercially.PropertiesGeneralPropertyValueCommentDensity2.7 g/cm³Typical for Wrought 1000 Series Alu

Aluminum JIS BA11PC is a popular alloy that offers customers very good atmospheric corrosion resistance and moderate strength. Aluminum 3003 offers good machinability for aluminum alloys, though it is not heat treatable. Unlike other aluminum alloys, JIS BA11PC is weldable by conventional welding me

Aluminum JIS BA11PC is a popular alloy that offers customers very good atmospheric corrosion resistance and moderate strength. Aluminum 3003 offers good machinability for aluminum alloys, though it is not heat treatable. Unlike other aluminum alloys, JIS BA11PC is weldable by conventional welding me

Aluminum JIS BA11PC is a popular alloy that offers customers very good atmospheric corrosion resistance and moderate strength. Aluminum 3003 offers good machinability for aluminum alloys, though it is not heat treatable. Unlike other aluminum alloys, JIS BA11PC is weldable by conventional welding me

Aluminum JIS 6063 is an architectural alloy that offers users a high resistance to corrosion and excellent finishing characteristics. Easy to extrude with fair machinability, JIS 6063 can be both hot and cold formed and is commonly available as T6 temper as well as T4 temper.PropertiesGeneralPropert

Aluminum JIS 6063 is an architectural alloy that offers users a high resistance to corrosion and excellent finishing characteristics. Easy to extrude with fair machinability, JIS 6063 can be both hot and cold formed and is commonly available as T6 temper as well as T4 temper.PropertiesGeneralPropert

JIS 1100 is a soft, non-heat-treatable and low strength alloy that offers strong corrosion resistance. Composed of 99% aluminum and 0.12% copper, JIS 1100 is purest grade of aluminum alloy available commercially.PropertiesGeneralPropertyValueCommentDensity2.7 g/cm³Typical for Wrought 1000 Series Alu