Printdur® 4404 (1.4404 / 316L) has established itself within additive manufacturing as the allrounder in the field of iron-based alloys. Printdur® 4404 is characterized by the following properties: Good processability with LPBF. Good mechanical properties. High PREN of 36 (Pitting Resistance Equiva

This alloy UNS R56410 is a Titanium Beta Alloy. It is harder and stronger than many titanium alloys. This Titanium is a heat treatable alloy, it’s weldable and it’s easily formed. The chief problems for this alloy include flank wear, spring-back and chip control. Because of these characteristics, po

- nitrogen alloyed steel for application in plant technology, for super heater and hot steam pipes, collectors, heat exchanger and other high loaded components - application temperature for continuous operation: 800°C - after welding steel is insensitive to hot crackingPropertiesGeneralPropertyTempe

Non-stabilized austenitic high temperature steel with good strength up to 650 °C. Application: mainly in the reactor engineering (Na cooling circuit) as well as for steam vessels and chemicals industryPropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.93 g/cm³MechanicalPropertyTemperatureValue

High temperature steel for pressure vessel and steam boiler engineering.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.93 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus-100.0 °C206 GPa20.0 °C196 - 198 GPa100.0 °C190 - 192 GPa200.0 °C182 - 183 GPa300.0 °C174 - 175 GPa400.0 °C

Material X3CrNiMoN27-5-2 is comparable to X 4 CrNiMoN 27 5 2 acc. to SEW400 : 1991. The ferritic austenitic steel shows low stress corrosion sensitivity. It has better general corrosion resistance than 1.4362 and is better machinable than austenite. The steel is characterized by high wear resistance

- not stabilised austenitic high-temperature resistant steel with good high-temperature strength up to 700°C - for application in nuclear power plants (sodium cooled fast breeder reactor, pressure tanks, fittings, piplines), in chemical industry, super heater tubes and turbine linesPropertiesGeneral

The fine grained steel is used acc. DIN 17178 : 1986-5 for welded steel tubes and acc. DIN 17179 : 1986-5 as seamless steel tubes for special purposes from -60 to 400 degrees C. Application: pressure vessel construction, apparatus construction, pipelines, mechanical engineering, toolbuilding Special

The fine grained steel is used acc. DIN 17178 : 1986-5 for welded steel tubes and acc. DIN 17179 : 1986-5 as seamless steel tubes for special purposes from -20 to 400 degrees C. Application: pressure vessel construction, apparatus construction, pipelines, mechanical engineering, toolbuilding Special

UGICHROM® is the result of combining the high efficiency of micro-fissuring chromium plating with the technology of the most advanced stainless steel bars. The UGICHROM® product range is recommended for hydraulic and pneumatic mechanisms. General properties - choice for performance: Low friction co

UGICHROM® is the result of combining the high efficiency of micro-fissuring chromium plating with the technology of the most advanced stainless steel bars. The UGICHROM® product range is recommended for hydraulic and pneumatic mechanisms. General properties - choice for performance: Low friction co

UGICHROM® is the result of combining the high efficiency of micro-fissuring chromium plating with the technology of the most advanced stainless steel bars. The UGICHROM® product range is recommended for hydraulic and pneumatic mechanisms. General properties - choice for performance: Low friction co

UGI® HT286 is an austenitic iron-base alloy containing nickel, chromium, molybdenum and titanium. The titanium and small amount of aluminium it contains enables the alloy to be strengthened by precipitation of the Ni3 (Ti,Al) gamma prime phase, providing good mechanical properties from cryogenic tem

Strong and corrosion resistant material for header and plate applications Use the URL below for more information: Gränges productsPropertiesDimensionPropertyValueDimensions<p>Standard process capabilities:</p> <p>Width: 10-1400mm</p> <p>Thickness 0.050-3.18mm</p>

Strong and corrosion resistant material for header and plate applications Use the URL below for more information: Gränges productsPropertiesDimensionPropertyValueDimensions<p>Standard process capabilities:</p> <p>Width: 10-1400mm</p> <p>Thickness 0.050-3.18mm</p>

Superior strength, Heat-treatable material Use the URL below for more information: Gränges productsPropertiesDimensionPropertyValueDimensions<p>Standard process capabilities:</p> <p>Width: 10-1400mm</p> <p>Thickness 0.050-3.18mm</p>MechanicalPropertyValueCommentT

A family of strong long life tube material Use the URL below for more information: Gränges productsPropertiesDimensionPropertyValueDimensions<p>Standard process capabilities:</p> <p>Width: 10-1400mm</p> <p>Thickness 0.050-3.18mm</p>MechanicalPropertyValueCommentT

A family of strong long life tube material Use the URL below for more information: Gränges productsPropertiesDimensionPropertyValueDimensions<p>Standard process capabilities:</p> <p>Width: 10-1400mm</p> <p>Thickness 0.050-3.18mm</p>MechanicalPropertyValueCommentT

EtchMet alloy is a material that is tailor made for the springs in voice coil motors and optical image stabilization systems common in smart phone cameras. These devices have a relatively large mass (lense) suspended by extremely small, thin springs. The small size of the springs requires very high

EtchMet alloy is a material that is tailor made for the springs in voice coil motors and optical image stabilization systems common in smart phone cameras. These devices have a relatively large mass (lense) suspended by extremely small, thin springs. The small size of the springs requires very high