PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.68 g/cm³H12EN 573-3, EN 4852.69 g/cm³H12EN 573-3, EN 485MechanicalPropertyValueConditionRelated StandardsCommentBending angle 90°0.5 °/tH12EN 573-3, EN 4851.0 °/tH12EN 573-3, EN 485Elastic modulus69.0 GPaH12EN 573-3, EN 48570.0 GPaH12E

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.68 g/cm³H112EN 573-3, EN 4852.69 g/cm³H112EN 573-3, EN 485MechanicalPropertyValueConditionRelated StandardsCommentElastic modulus69.0 GPaH112EN 573-3, EN 48570.0 GPaH112EN 573-3, EN 485Hardness, Brinell39.0 [-]H112EN 573-3, EN 485Plane

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.69 g/cm³H38EN 573-3, EN 485MechanicalPropertyValueConditionRelated StandardsCommentBending angle 90°1.5 °/tH38EN 573-3, EN 4852.5 °/tH38EN 573-3, EN 4853.0 °/tH38EN 573-3, EN 485Elastic modulus69.5 GPaH38EN 573-3, EN 485Hardness, Brine

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.69 g/cm³H36EN 573-3, EN 485MechanicalPropertyValueConditionRelated StandardsCommentBending angle 90°1.0 °/tH36EN 573-3, EN 4851.5 °/tH36EN 573-3, EN 4852.0 °/tH36EN 573-3, EN 4852.5 °/tH36EN 573-3, EN 485Elastic modulus69.5 GPaH36EN 57

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.69 g/cm³H26EN 573-3, EN 485MechanicalPropertyValueConditionRelated StandardsCommentBending angle 90°1.0 °/tH26EN 573-3, EN 4851.5 °/tH26EN 573-3, EN 4852.0 °/tH26EN 573-3, EN 4852.5 °/tH26EN 573-3, EN 485Elastic modulus69.5 GPaH26EN 57

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.7 g/cm³H19EN 573-3, EN 683MechanicalPropertyValueConditionRelated StandardsCommentElastic modulus69.5 GPaH19EN 573-3, EN 683Plane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought 6000 Series AluminiumPoisson's ratio0.

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.7 g/cm³H18EN 573-3, EN 683MechanicalPropertyValueConditionRelated StandardsCommentElastic modulus69.5 GPaH18EN 573-3, EN 683Plane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought 6000 Series AluminiumPoisson's ratio0.

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.65 g/cm³T6EN 1706MechanicalPropertyValueConditionRelated StandardsCommentBending Fatigue Strength80.0 - 110.0 MPaT6EN 1706Elastic modulus74.0 GPaT6EN 1706Hardness, Brinell75.0 [-]T6EN 170680.0 [-]T6EN 1706Poisson's ratio0.33 [-]Ty

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.65 g/cm³FEN 1706MechanicalPropertyValueConditionRelated StandardsCommentBending Fatigue Strength80.0 - 110.0 MPaFEN 1706Elastic modulus74.0 GPaFEN 1706Hardness, Brinell50.0 [-]FEN 170655.0 [-]FEN 1706Poisson's ratio0.33 [-]Typical

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.65 g/cm³T64EN 1706MechanicalPropertyValueConditionRelated StandardsCommentBending Fatigue Strength80.0 - 110.0 MPaT64EN 1706Elastic modulus74.0 GPaT64EN 1706Hardness, Brinell80.0 [-]T64EN 1706Poisson's ratio0.33 [-]Typical for Cas

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.65 g/cm³T6EN 1706MechanicalPropertyValueConditionRelated StandardsCommentBending Fatigue Strength80.0 - 110.0 MPaT6EN 1706Elastic modulus74.0 GPaT6EN 1706Hardness, Brinell75.0 [-]T6EN 170690.0 [-]T6EN 1706Poisson's ratio0.33 [-]Ty

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.65 g/cm³T64EN 1706MechanicalPropertyValueConditionRelated StandardsCommentBending Fatigue Strength80.0 - 110.0 MPaT64EN 1706Elastic modulus74.0 GPaT64EN 1706Hardness, Brinell80.0 [-]T64EN 1706Poisson's ratio0.33 [-]Typical for Cas

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.65 g/cm³T6EN 1706MechanicalPropertyValueConditionRelated StandardsCommentBending Fatigue Strength80.0 - 110.0 MPaT6EN 1706Elastic modulus74.0 GPaT6EN 1706Hardness, Brinell75.0 [-]T6EN 170690.0 [-]T6EN 1706Poisson's ratio0.33 [-]Ty

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.7 g/cm³H18EN 573-3, EN 1301MechanicalPropertyValueConditionRelated StandardsCommentElastic modulus70.0 GPaH18EN 573-3, EN 1301Elongation2.0 %H18EN 573-3, EN 1301Plane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought 6000 S

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.8 g/cm³T452EN 573-3, EN 485MechanicalPropertyValueConditionRelated StandardsCommentElastic modulus72.5 GPaT452EN 573-3, EN 485Plane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought 2000 Series AluminiumPoisson's ratio

PropertiesGeneralPropertyValueConditionRelated StandardsDensity2.8 g/cm³H13EN 573-3, EN 1301MechanicalPropertyValueConditionRelated StandardsCommentElastic modulus72.5 GPaH13EN 573-3, EN 1301Elongation5.0 %H13EN 573-3, EN 1301Plane-Strain Fracture Toughnes22.0 - 35.0 MPa·√mTypical for Wrought 2000 S

DI-TANK 460 is the Dillinger designation of fine grain steels thermo-mechanically rolled (M or TMCP) used for the fabrication of storage tanks for hydrocarbons in the oil and gas industry and complies with the relevant construction codes. The DI-TANK offers two options, in accordance with different

UGIMA® 4542 is the first UGIMA® steel product from the family of improved machinability, precipitation hardened stainless steels. It is manufactured only by UGITECH. Its properties are identical to those of UGI 4542 except for its machinability which is significantly better than that of UGI 4542: UG

Sanicro® 41 is a nickel alloy characterized by the following properties: Very good resistance to stress corrosion cracking (SCC) in chloride and sour (H₂S/Cl⁻) environments Very good resistance to corrosion in acidic media such as sulfuric acid Superior resistance to pitting and crevice corrosion t

Sanicro® 41 is a nickel alloy characterized by the following properties: Very good resistance to stress corrosion cracking (SCC) in chloride and sour (H₂S/Cl⁻) environments Very good resistance to corrosion in acidic media such as sulfuric acid Superior resistance to pitting and crevice corrosion t