Quard 550 is a martensitic abrasion resistant steel, with an average hardness of 550 HBW. Its very high resistance to abrasive wear makes it ideal where long service life is required. With the combination of superior hardness and strength, Quard 550 is an optimal choice for the recycling, mining and

Materion Brush Performance Alloys’ BrushForm® 96 Strip is a high-performance, heat treatable spinodal copper nickel tin alloy designed to provide optimal formability and strength characteristics in conductive spring applications such as electronic connectors, switches, and sensors. It is available i

- ferritic steel with good resistance to scaling (on air to 800 °C), which also a certain corrosive resistance possesses - employment mainly in the automobile industry for mufflers and for parts of exhaust emission control (stampings, pipes)PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.7

Application: - normally in quenched and tempered state with fine grounded or polished surface (tap elements, valve spindle, arbor, pump elements, bolts, screws) - application temperature: up to 550 °C - for construction elements in water and steam an mild acting media in food inustryPropertiesGenera

The zircon-alloyed patented steel X2CrNbZr17 is used as cold rolled strip. It shows resistance to intercrystalline corrosion both in delivery and welded condition. The material may be used as heat-resistant steel acc. to DIN EN 10095 : 1999-05.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7

The ferritic steel X2CrMoTi17-1 (special grade, annealed) is well formable. It is used for household appliances and pipes.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.7 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus20.0 °C220 GPa100.0 °C215 GPa200.0 °C210 GPa300.0 °C205 GP

Material X6CrNiTi12 is a ferritic steel which is used in annealed condition for cold rolled strip as well as for warm rolled strip and sheet. It does not show resistance to intercrystalline corrosion both in delivery and welded condition.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.7 g/c

The steel P355N is a weldable fine-grain structural steel (alloy quality steel). Tubes made of this steel are used in the pressure vessel construction, apparatus construction, pipeline construction as well as in the general mechanical engineering and device construction.PropertiesGeneralPropertyTemp

The ferritic patented special grade X6CrNi17-1is applicated in annealed condition in the form of cold rolled strip for valves, shafts and rotor discs. Resistance to intercrystalline corrosion in delivery corrosion but not in welded conditionPropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.7

Material X2CrNi12 (former: X 2 Cr 11) is also contained in SEW 400 : 1997-02 (here for tempered condition, in DIN EN 10088 for annealed condition). This material is a ferritic steel showing considerably higher corrosion resistance than general construction steels. It is more cost-efficient than high

The ferritic steel (special grade annealed) is used for cold rolled strip. It shows resistance to intercrystalline corrosion also in welded condition.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.5 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus20.0 °C220 GPa100.0 °C215 GPa2

The ferritic steel X2CrMoTi29-4 (special grade annealed) is used for cold rolled strip. It shows resistance to intercrystalline corrosion also in welded condition.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.7 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus20.0 °C220 GPa100

PropertiesGeneralPropertyValueConditionRelated StandardsShapeDensity2.73 g/cm³H36EN 573-3, EN 1592Strip, Sheet, Plate, Foil, Bar, Rod, TubeMechanicalPropertyValueConditionRelated StandardsShapeCommentElastic modulus69.5 GPaH36EN 573-3, EN 1592Strip, Sheet, Plate, Foil, Bar, Rod, TubePlane-Strain Fra

PropertiesGeneralPropertyValueConditionRelated StandardsShapeDensity2.7 g/cm³H16EN 573-3, EN 485Plate, Rod2.705 g/cm³H16EN 573-3, EN 485Plate, RodMechanicalPropertyValueConditionRelated StandardsShapeCommentBending angle 90°0.5 °/tH16EN 573-3, EN 485Plate, Rod1.0 °/tH16EN 573-3, EN 485Plate, Rod1.5

PropertiesGeneralPropertyValueConditionRelated StandardsShapeDensity2.65 g/cm³T64EN 1706, EN 13195CastingMechanicalPropertyValueConditionRelated StandardsShapeCommentBending Fatigue Strength80.0 - 110.0 MPaT64EN 1706, EN 13195CastingElastic modulus74.0 GPaT64EN 1706, EN 13195CastingHardness, Brinell

ASTM 1100 is a soft, non-heat-treatable and low strength alloy that offers strong corrosion resistance. Composed of 99% aluminum and 0.12% copper, ASTM 1100 is purest grade of aluminum alloy available commercially.PropertiesGeneralPropertyValueCommentDensity2.7 g/cm³Typical for Wrought 1000 Series A

ASTM 1100 is a soft, non-heat-treatable and low strength alloy that offers strong corrosion resistance. Composed of 99% aluminum and 0.12% copper, ASTM 1100 is purest grade of aluminum alloy available commercially.PropertiesGeneralPropertyValueCommentDensity2.7 g/cm³Typical for Wrought 1000 Series A

Aluminum ASTM 2024, known for its use in aircraft industry, is an alloy that offers excellent strength. When in the annealed condition it is readily formed and has good machinability. Though it has a relatively low level of corrosion resistance, it can be machined to a high finish.PropertiesGeneralP

ASTM 2014 is an alloy with strength, machinability and welding capabilities, Aluminum Alloy ASTM 2014 is an excellent option. It is a precipitation hardening alloy that maintains strength after heat treatment.PropertiesGeneralPropertyValueCommentDensity2.75 - 2.84 g/cm³Typical for Wrought 2000 Serie

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Chromium Molybdenum Steel MechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Chromium Molybdenum Steel Elongation A5023.0 °C14 - 16 %Poisson's ratio23.0 °C0.3 [-]Typical