Naturally hard AlMn alloy. The alloy is food safe.PropertiesGeneralPropertyTemperatureValueConditionRelated StandardsShapeDensity2.73 g/cm³H19EN 573-3, EN 541Strip, Sheet, Plate20.0 °C2.71 g/cm³H19EN 573-3SheetMechanicalPropertyTemperatureValueConditionRelated StandardsShapeCommentElastic modulus70.

UGIMA®-X 4404 is a stainless steel of highly improved machinability manufactured only by Ugitech. Its properties are identical to those of other 1.4404s except for its machinability, which is even better than that of UGIMA® 4404 and UGIMA® 4404 HM, the 1.4404 grades from Ugitech with already improv

UGIMA®-X 4404 is a stainless steel of highly improved machinability manufactured only by Ugitech. Its properties are identical to those of other 1.4404s except for its machinability, which is even better than that of UGIMA® 4404 and UGIMA® 4404 HM, the 1.4404 grades from Ugitech with already improv

UGI® 446 is a ferritic stainless steel with more than 23% of chromium content. Thus its corrosion resistance is among the best within the ferritic stainless grades. As UGI® 446 stands well thermal oxidation with a good behavior against scaling off phenomena, it is commonly used for applications wher

UGIPERM® 12FM is a free-machining ferritic stainless steel containing 12% chromium and an addition of silicon. This grade, which was developed for magnetic applications, has high permeability and a particularly low coercive field. It is specially designed for the manufacture of electromechanical ac

Titanium UNS R54810 is a near Alpha Alloy that was primarily designed for use at elevated temperatures – up to 455 degrees centigrade. It offers the highest modulus and lowest density of all Titanium alloys. It has good creep strength and it’s weldable by the inert gas fusion and resistance-welding

Titanium UNS R56320 has medium strength that falls between Grade 4 and Grade 5. It has excellent corrosion resistance and is used in Aerospace and Industrial applications. UNS R56320 Titanium can be used at higher temperatures than Grades 1 through 4. UNS R56320 titanium has good cold rolling proper

UNS R50400 titanium is the second of four commercially unalloyed titanium grades. It has a moderate strength as well as excellent welding properties. The material is known for its good resistance to oxidation and corrosion.PropertiesGeneralPropertyValueRelated StandardsShapeDensity4.51 g/cm³ASTM B-2

UNS R50250 titanium is the first of four commercially pure titanium grades. UNS R50250 is considered the softest titanium with the highest ductility. This grade is known for its good cold forming characteristics and high impact toughness. It also provides excellent corrosion resistance and welding p

Extra High Strength SteelPropertiesGeneralPropertyValueCommentCarbon equivalent (CET)0.32 [-]Carbon equivalent (CEV)0.46 [-]for t ≤ 50 mm plate thickness0.48 [-]for 50 < t ≤100 mm plate thickness0.5 [-]for 100 < t ≤ 250 mm plate thicknessDensity7.8 - 7.9 g/cm³typical for low carbon steelMechan

Extra High Strength SteelPropertiesGeneralPropertyValueCommentCarbon equivalent (CET)0.32 [-]Carbon equivalent (CEV)0.46 [-]for t ≤ 50 mm plate thickness0.48 [-]for 50 < t ≤100 mm plate thickness0.5 [-]for 100 < t ≤ 250 mm plate thicknessDensity7.8 - 7.9 g/cm³typical for low carbon steelMechan

Extra High Strength SteelPropertiesGeneralPropertyValueCommentCarbon equivalent (CET)0.32 [-]Carbon equivalent (CEV)0.46 [-]for t ≤ 50 mm plate thickness0.48 [-]for 50 < t ≤100 mm plate thickness0.5 [-]for 100 < t ≤ 250 mm plate thicknessDensity7.8 - 7.9 g/cm³typical for low carbon steelMechan

Extra High Strength SteelPropertiesGeneralPropertyValueCommentCarbon equivalent (CET)0.4 [-]Carbon equivalent (CEV)0.64 [-]for t ≤ 50 mm plate thickness0.66 [-]for 50 < t ≤100 mm plate thickness0.68 [-]t ≤ 65 mm tabulars0.7 [-]for 100 < t ≤ 250 mm plate thicknessDensity7.8 - 7.9 g/cm³typical f

Extra High Strength SteelPropertiesGeneralPropertyValueCommentCarbon equivalent (CET)0.4 [-]Carbon equivalent (CEV)0.64 [-]for t ≤ 50 mm plate thickness0.66 [-]for 50 < t ≤100 mm plate thickness0.68 [-]t ≤ 65 mm tabulars0.7 [-]for 100 < t ≤ 250 mm plate thicknessDensity7.8 - 7.9 g/cm³typical f

Extra High Strength SteelPropertiesGeneralPropertyValueCommentCarbon equivalent (CET)0.4 [-]Carbon equivalent (CEV)0.64 [-]for t ≤ 50 mm plate thickness0.66 [-]for 50 < t ≤100 mm plate thickness0.68 [-]t ≤ 65 mm tabulars0.7 [-]for 100 < t ≤ 250 mm plate thicknessDensity7.8 - 7.9 g/cm³typical f

Extra High Strength SteelPropertiesGeneralPropertyValueCommentCarbon equivalent (CET)0.4 [-]Carbon equivalent (CEV)0.64 [-]for t ≤ 50 mm plate thickness0.66 [-]for 50 < t ≤100 mm plate thickness0.68 [-]t ≤ 65 mm tabulars0.7 [-]for 100 < t ≤ 250 mm plate thicknessDensity7.8 - 7.9 g/cm³typical f

Duplex stainless steel with high corrosion resistance and high mechanical performances, UGI® 4462 has excellent corrosion resistance in aggressive environments, coupled with high mechanical properties. The chemical composition of UGI® 4462 is optimised to obtain, after a solution annealing heat tre

UGI® 15-5PH AIR or UGI® 4545 AIR is a PH (Precipitation Hardening) martensitic stainless steel of premium quality, mainly designed for aerospace purposes. It is used for parts requiring a combination of high strength and high toughness. This grade also presents a good resistance to fatigue failure.

Mechanical properties in bars (YS & UTS) are: Better than those of 316L and also those of 316LN, Better Corrosion Resistance than that of 316L The chemical composition is balanced to obtain 40-60% ferrite after annealing between 950 and 1050°C fol-lowed by a fast cooling. The sensitivity to pre

Mechanical properties in bars (YS & UTS) are: Better than those of 316L and also those of 316LN, Better Corrosion Resistance than that of 316L The chemical composition is balanced to obtain 40-60% ferrite after annealing between 950 and 1050°C fol-lowed by a fast cooling. The sensitivity to pre