G-X 40 CrSi 13, for application as hot plate, dore cases, and other low mechanical loaded compoments of ovens, furthermore for burner nozzle, burner bodys, sliding shoes and slide bars, transport rollers etc. resistance: - in oxidising burning atmosphere: 900°C - in reductive burning atmosphere: 850

The steel 20 MoCr 4 respectively 20 MoCr 5 (mat. no. 1.7321) is used for wear loaded parts in the vehicle and mechanical engineering with medium core strength, high toughness and high fatigue strength (e.g. gears, shafts, axles). The lowest application amounts to -60 °C, the best application up to 6

The steel 20 MoCr 4 respectively 20 MoCr 5 (mat. no. 1.7321) is used for wear loaded parts in the vehicle and mechanical engineering with medium core strength, high toughness and high fatigue strength (e.g. gears, shafts, axles). The lowest application amounts to -60 °C, the best application up to 6

The steel 20 MnCrS 5 in opposite to 20 MnCr 5 is used for larger parts with higher core strength and better machinability in the vehicle and mechanical engineering (e.g. gearboxes, joint parts, gears, bolts). The lowest application amounts to -25 °C, the best application up to 80 mm nominal size.Pro

The steel 20 MnCrS 5 in opposite to 20 MnCr 5 is used for larger parts with higher core strength and better machinability in the vehicle and mechanical engineering (e.g. gearboxes, joint parts, gears, bolts). The lowest application amounts to -25 °C, the best application up to 80 mm nominal size.Pro

The steel 20 MnCrS 5 in opposite to 20 MnCr 5 is used for larger parts with higher core strength and better machinability in the vehicle and mechanical engineering (e.g. gearboxes, joint parts, gears, bolts). The lowest application amounts to -25 °C, the best application up to 80 mm nominal size.Pro

The steel 20 MnCrS 5 in opposite to 20 MnCr 5 is used for larger parts with higher core strength and better machinability in the vehicle and mechanical engineering (e.g. gearboxes, joint parts, gears, bolts). The lowest application amounts to -25 °C, the best application up to 80 mm nominal size.Pro

The steel 20 CrS 4 is used for high wear loaded and better machinable parts in the vehicle and mechanical engineering (e.g. camshafts, piston pins, gears). The lowest application amounts to -25 °C, the best application from 5 to 10 mm nominal size.PropertiesGeneralPropertyTemperatureValueDensity20.0

Welded precision steel tubes made from St 33 are used for thin-walled precision constructional elements with a good surface condition.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.85 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus-100.0 °C217 GPa20.0 °C212 GPa100.0 °C207 GPa

The steel 20 CrS 4 is used for high wear loaded and better machinable parts in the vehicle and mechanical engineering (e.g. camshafts, piston pins, gears). The lowest application amounts to -25 °C, the best application from 5 to 10 mm nominal size.PropertiesGeneralPropertyTemperatureValueDensity20.0

The steel 20 CrS 4 is used for high wear loaded and better machinable parts in the vehicle and mechanical engineering (e.g. camshafts, piston pins, gears). The lowest application amounts to -25 °C, the best application from 5 to 10 mm nominal size.PropertiesGeneralPropertyTemperatureValueDensity20.0

The steel 20 CrS 4 is used for high wear loaded and better machinable parts in the vehicle and mechanical engineering (e.g. camshafts, piston pins, gears). The lowest application amounts to -25 °C, the best application from 5 to 10 mm nominal size.PropertiesGeneralPropertyTemperatureValueDensity20.0

The steel 20 Cr 4 is used for high wear loaded parts in the vehicle and mechanical engineering (e.g. camshafts, piston pins, cylinder). The lowest application amounts to -25 °C, the best application up to 25 mm nominal size.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.83 g/cm³MechanicalP

The steel 20 Cr 4 is used for high wear loaded parts in the vehicle and mechanical engineering (e.g. camshafts, piston pins, cylinder). The lowest application amounts to -25 °C, the best application up to 25 mm nominal size.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.83 g/cm³MechanicalP

The steel 20 Cr 4 is used for high wear loaded parts in the vehicle and mechanical engineering (e.g. camshafts, piston pins, cylinder). The lowest application amounts to -25 °C, the best application up to 25 mm nominal size.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.83 g/cm³MechanicalP

The steel 20 Cr 4 is used for high wear loaded parts in the vehicle and mechanical engineering (e.g. camshafts, piston pins, cylinder). The lowest application amounts to -25 °C, the best application up to 25 mm nominal size.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.83 g/cm³MechanicalP

The steel 17 CrNiMo 6 is used for high loaded parts in the vehicle and mechanical engineering with high demands on toughness and core strength (e.g. gear parts, drive pinions). The lowest application amounts to -60 °C.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.8 g/cm³MechanicalProperty

CuAl10Ni5Fe4 (CW307G) is a wrought alloy of high strength, also at increased temperatures. The strength properties of cold formable wrought alloys are primarily dependent on the deformation grade. Tensile strength, yield strength and hardness rise according to the increasing cold forming grade. Elon

CuAl10Fe3Mn2 (CW306G) is a wrought alloy of high strength, also at increased temperatures. The strength properties of cold formable wrought alloys are primarily dependent on the deformation grade. Tensile strength, yield strength and hardness rise according to the increasing cold forming grade. Elon

CuAl10Fe3Mn2 (CW306G) is a wrought alloy of high strength, also at increased temperatures. The strength properties of cold formable wrought alloys are primarily dependent on the deformation grade. Tensile strength, yield strength and hardness rise according to the increasing cold forming grade. Elon