The ferritic-pearlitic, precipitation hardened steel 44 MnSiVS 6 is used for forgings in the automotive industry.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.85 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus-100.0 °C217 GPa20.0 °C212 GPa100.0 °C207 GPa200.0 °C199 GPa300.0

The ferritic-pearlitic, precipitation hardened steel 27 MnSiVS 6 is used for forgings in the automotive industry.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.85 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus-100.0 °C217 GPa20.0 °C212 GPa100.0 °C207 GPa200.0 °C199 GPa300.0

The ferritic-pearlitic, precipitation hardened steel 38 MnSiVS 5 is used for forgings in the automotive industry.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.85 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus-100.0 °C217 GPa20.0 °C212 GPa100.0 °C207 GPa200.0 °C199 GPa300.0

Application preferably for welded components, e.g. chain links for undercarriages.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.85 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Medium Carbon SteelElongation20.0 °C17 %Poisson's ratio23.0

Application for components of the general mechanical engineering, such as sprocket wheels and chain links for conveyor chains, drive tumblers, cog wheels, gear pinions, worms, gate valve straight-guiders and similar locomotive components, fuel cams, cam discs, doxford pistons, rolling levers.Propert

Application for components of the general mechanical engineering, such as sprocket wheels and chain links for conveyor chains, drive tumblers, cog wheels, gear pinions, worms, gate valve straight-guiders and similar locomotive components, fuel cams, cam discs, doxford pistons, rolling levers.Propert

The high temperature alloy steel 27NiCrMoV11-6 is used for larger preshaped components in the quenched and tempered condition in turbine and generator installations, in particular as shafts and discs. The steel is weldable if the relevant measures required are observed.PropertiesGeneralPropertyTempe

G-X 2 CrNiMoN 18 10, for cast parts with increased resistance against intercristalline corrosion. no treatment after welding necessaryPropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.9 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C195 GPaTypical for Austenitic Stainless

G-X 8 CrNiN 26 7, for high toughness demanded components, like casings for gate valves and pumps, pressing screws und -spindles sockets, components for hydrofoils.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.7 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 GPaTyp

G-X 2 CrNiN 18 9, for cast parts with increased resistance against intercristalline corrosion, without after-treatment after the welding procedurePropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.9 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C195 GPaTypical for Austenit

JIS 6061 is a readily available alloy that has good surface finish and ability to be anodized.Easy of weldability and brazability with nice surface finish. Resistance to corrosion from seawater and atmospheric conditions. Suitable for hot forging.Quantity: 1 PCSPropertiesGeneralPropertyValueCommentD

Aluminum JIS 2017 is a heat treatable wrought alloy that offers decent strength, ductility, and good machinability. Aluminum JIS 2017 offers more strength than Aluminum 2011, and has fair workability and corrosion resistance. As with many aluminum alloys, Aluminum JIS 2017 should not be welded as it

Aluminum JIS 3003 is a popular alloy that offers customers very good atmospheric corrosion resistance and moderate strength. Aluminum 3003 offers good machinability for aluminum alloys, though it is not heat treatable. Unlike other aluminum alloys, JIS 3003 is weldable by conventional welding method

The platinum-iridium material PtIr5, also Pt95Ir5 or 95Pt5Ir, is used as contact material.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C21.5 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus20.0 °C190 GPaElongation20.0 °C26 %Hardness, Vickers20.0 °C80 [-]Poisson's ratio23.0

The platinum-iridium material PtIr5, also Pt95Ir5 or 95Pt5Ir, is used as contact material.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C21.5 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus20.0 °C190 GPaElongation20.0 °C2 %Hardness, Vickers20.0 °C154 [-]Poisson's ratio23.0

The platinum-iridium material PtIr10, also Pt10Ir, Pt90Ir10, for jewelery alloys Pt / Ir900 or Pt900 / Ir100 shows a very good corrosion behavior as well as good wear properties. He will u. a. for mains electrodes in gravimetry as well as for sliding contacts and switching contacts as well as for la

The platinum-gold material PtAu5 (in the literature also Pt5Au, Pt95Au5, PtAu 95/5, etc.) is used for laboratory crucibles for melt digestion of minerals and ferroalloys, and for laboratory shells in X-ray fluorescence analysis also in fine grain stabilized state. Further use for crucibles, casings

The group of platinum metals includes the elements ruthenium (Ru), rhodium (Rh), palladium (Pd) (light platinum metals with densities around 12 g/cm³) as well as osmium (Os), iridium (Ir) and platinum (Pt) ( heavy platinum metals with densities up to 22 g/cm³). Platinum is a gray-white malleable met

The group of platinum metals includes the elements ruthenium (Ru), rhodium (Rh), palladium (Pd) (light platinum metals with densities around 12 g/cm³) as well as osmium (Os), iridium (Ir) and platinum (Pt) ( heavy platinum metals with densities up to 22 g/cm³). Platinum is a gray-white malleable met

Gold (Au) is a reddish-yellow, in very thin films blue-green translucent, cubic crystallizing precious metal. It is one of the heaviest metals, is relatively soft and very elastic. Among all metals, it has the best hot and cold ductility and can be hammered down to foil up to 0.0001 mm thick. Gold,