PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A523.0 °C12 - 13 %Poisson's ratio23.0 °C0.29 [-]Typical for Low Carbon Stee

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A523.0 °C12 - 13 %Poisson's ratio23.0 °C0.29 [-]Typical for Low Carbon Stee

Steel 28Mn6 is suitable for lower stressed components in vehicle manufacturing, engine and machine engineering weldable (e.g. cardan shafts, camshafts, gear wheels).PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.82 - 7.85 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus-100.0

Steel C60R is suitable for high loaded parts in vehicle manufacturing, engine and machine engineering requiring improved workability while maintaining constant strength properties (e.g. gear wheels, pinions, shafts).As a bright steel product it is used in the form of bars, bright, straight, in diffe

Steel C60E is suitable for larger parts (heavy forged parts) and high loading in vehicle manufacturing, engine and machine engineering, surface hardening possible (e.g. crankshafts, bolts, transmission parts).As a bright steel product it is used in the form of bars, bright, straight, in different co

Steel C55E is suitable for larger parts in vehicle manufacturing, engine and machine engineering undergoing a surface hardening (e.g. gear wheels, screws, shafts).PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.8 - 7.85 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus-100.0 °C2

Steel C50E is suitable for larger parts (heavy forged parts) in vehicle manufacturing, engine and machine engineering (e.g. transmission parts, shafts, wheel hubs).As a bright steel product it is used in the form of bars, bright, straight, in different conditions (see DIN EN 10277).PropertiesGeneral

Steel C35E is suitable for slightly higher loaded components with higher dimensions (large forged parts) and more complex form as well as higher demands on uniformity of qualities and surface appearance in vehicle manufacturing and machine engineering (e.g. transmissin parts, crankshafts).As a brigh

GB/T 699-1999 Grade 45 is a quality carbon structural steel that is widely used in mechanical manufacturing applications and high-strength moving parts.PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Medium Carbon SteelMechanicalPropertyTemperatureValueCommen

Copper aluminum plates, sheet and circles for boilers, pressure vessels and hot water storage units.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.6 g/cm³MechanicalPropertyTemperatureValueCommentElastic modulus-253.0 °C128 GPa-195.0 °C123 GPa-100.0 °C122 GPa20.0 °C120 GPa50.0 °C120 GPa100.

Material CuZn39Pb2, mat. No. CW612N, is an unhardenable wrought alloy. to the comparable make CuZn39Pb2, mat. No. 2.0380 acc. to DIN 17660 : 1983-12 applies: High hardness and strength parameter are achievable by cold forming only. Thermal and electrical conductivity are lower than for the unleaded

Material CuZn39Pb2, mat. No. CW612N, is an unhardenable wrought alloy. to the comparable make CuZn39Pb2, mat. No. 2.0380 acc. to DIN 17660 : 1983-12 applies: High hardness and strength parameter are achievable by cold forming only. Thermal and electrical conductivity are lower than for the unleaded

Material CuZn39Pb0,5, mat. No. CW610N, is an unhardenable wrought alloy. to the comparable make CuZn39Pb0,5, mat. No. 2.0372 acc. to DIN 17660 : 1983-12 applies: High hardness and strength parameter are achievable by cold forming only. Thermal and electrical conductivity are lower than for the unlea

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A523.0 °C18 %Poisson's ratio23.0 °C0.29 [-]Typical for Low Carbon SteelShea

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A523.0 °C18 %Poisson's ratio23.0 °C0.29 [-]Typical for Low Carbon SteelShea

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A523.0 °C20 %Poisson's ratio23.0 °C0.29 [-]Typical for Low Carbon SteelShea

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelDimensionPropertyValueWall thickness1 - 8 mmMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A523.0 °C24 - 35 %Poisson's rat

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelDimensionPropertyValueWall thickness1 - 8 mmMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A523.0 °C11 - 25 %Elongation A5, tra

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelDimensionPropertyValueWall thickness3 - 8 mmMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A523.0 °C19 - 30 %Elongation A5, tra

PropertiesGeneralPropertyTemperatureValueCommentDensity23.0 °C7.8 - 7.9 g/cm³Typical for Low Carbon SteelDimensionPropertyValueWall thickness1 - 8 mmMechanicalPropertyTemperatureValueCommentElastic modulus23.0 °C200 - 215 GPaTypical for Low Carbon SteelElongation A523.0 °C14 - 30 %Poisson's rat