Steel grade X6CrNiMoTi17-12-2 acc. to DIN EN 10272 : 2001-01is used for hot and cold formed rods for pressure vessels. the material is the stabilized by Ti option of 1.4401. The steel shows increased corrosion resistance to non-oxidizing acids and halogenated media due to the high Mo-content. It has

The austenitic steel grade X5CrNiMo17-12-2 acc. to DIN EN 10272 : 2001-01is used for hot and cold formed rods for pressure vessels. The material is a CrNiMo-steel with increased resistance to non-oxidizing acids and halogenated media, to intercrystalline corrosion (ic), but only in delivery conditio

The austenitic steel grade X5CrNi18-10 acc. to DIN EN 10272 : 2001-01is used for hot and cold formed rods for pressure vessel. The standard-type of the austenitic CrNi-steels shows high corrosion resistance but no resistance to intercrystalline corrosion (ic) in sensitized condition (resistance to i

The steel grade X3CrNiMo17-13-3 acc. to DIN EN 10272 : 2001-01is used for hot and cold formed rods for pressure vessels. The corrosion behaviour of the steel is similar to 1.4401. Slightly improved resistance to selective attack due to the higher Mo-content. The material is resistant to intercrystal

The austenitic steel grade X2CrNi19-11 acc. to DIN EN 10272 : 2001-01is used for hot and cold formed rods for pressure vessel. It shows due to the nitrogen-alloying an increased yield point also at higher temperatures. This is utilized in pressure vessel and lightweight construction. The N-content c

The steel grade X2CrNiMoN17-13-5 acc. to DIN EN 10271 : 2001-01is used for hot and cold formed rods for pressure vessels. The material shows high pitting and crevice corrosion resistance (better qualities than 1.4436) as well as stress corrosion resistance with excellent general resistance in many o

Steel grade X2CrNiMo17-13-3 acc. to DIN EN 10272 : 2001-01is used for hot and cold formed rods for pressure vessels. It is a fully austenitic steel, it is suitable for mirror finishing. By N-alloying higher strength, by higher Mo-addition higher corrosion resistance than 1.4406 particularly to non-o

The austenitic steel grade X2CrNiMoN17-11-2 acc. to DIN EN 10272 : 2001-01is used for hot and cold formed rods for pressure vessels. The material shows higher strength and structure stability by N-addition. It has high resistance to oxidizing media. its interaction parameter (Pitting index) is incre

Steel grade X2CrNiMo18-14-3 acc. to DIN EN 10272 : 2001-01is used for hot and cold formed rods for pressure vessels. The material is an option of 1.4404 with sightly increased alloying contents for Cr, Ni and Mo, therefore improved corrosion properties. It is resistant to intercrystalline corrosion,

Steel grade X2CrNiMo17-12-2 acc. to DIN EN 10272 : 2001-01is used for hot and cold formed rods for pressure vessels. It is a modification of steel 1.440 and shows high resistance to non-oxidizing acids and chloride containing media. It is suitable for mirror finishing and very good cold formable. Th

The austenitic steel grade X2CrNi19-11 acc. to DIN EN 10272 : 2001-01is used for hot and cold formed steels for pressure vessel. It shows resistance to intercrystalline corrosion in delivery condition as well as in sensitized condition due to the lowered c-content.PropertiesGeneralPropertyTemperatur

The austenitic steel grade X1NiCrMoCuN25-20-7 acc. to DIN EN 10272 : 2001-01is used for hot and cold formed rods for pressure vessel. The material is the higher by Mo-alloyed option of 1.4539. The steel shows very high resistance to crevice corrosion, pitting as well as to pitting corrosion caused b

The austenitic steel grade X1NiCrMoCu31-27-4 acc. to DIN EN 10272 : 2001-01is used for hot and cold formed rods for pressure vessels. The material is resistant to intercrystalline corrosion also in sensitized condition.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C8 - 8.08 g/cm³MechanicalPr

The austenitic steel grade X1NiCrMoCu25-20-5 acc. to DIN EN 10272 : 2001-01is used for hot and cold formed rods for pressure vessel. The material shows high resistance to highly aggressive organic and inorganic acids, high pitting and largely stress corrosion resistance. With an interaction paramete

The material X2CrNiMo17-12-2, mat. no. 1.4404, is an modification of the X5CrNiMo17-12-2 (1.4401). It shows high corrosion resistance, also because of the lower C-content, to not oxidising acids and chloride containing media, is high polishable and very good cold formable. According DIN 17440 : 1996

The material X2CrNiMo17-12-2, mat. no. 1.4404, is an modification of the X5CrNiMo17-12-2 (1.4401). It shows high corrosion resistance, also because of the lower C-content, to not oxidising acids and chloride containing media, is high polishable and very good cold formable. According DIN 17440 : 1996

Steel C25 is suitable for low strained parts of small heat-treatment sections in vehicle manufacturing and machine engineering (e.g. gear wheels, piston rods). Lowest working temperature -25 °C.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.83 - 7.85 g/cm³MechanicalPropertyTemperatureValue

Steel C22 is suitable for slightly loaded parts of small heat-treatment sections in vehicle manufacturing and machine engineering (e.g. piston rods, gear wheels). Lowest working temperature -25 °C.PropertiesGeneralPropertyTemperatureValueDensity20.0 °C7.83 - 7.85 g/cm³MechanicalPropertyTemperatureVa

Steel C25R is suitable for low strained parts in vehicle manufacturing and machine engineering which have to meet higher demands on workability while maintaining mechanical properties (e.g. transmission parts, crankshafts, cylinder). Lowest working temperature -25 °C.PropertiesGeneralPropertyTempera

PropertiesGeneralPropertyValueCommentDensity2.75 - 2.84 g/cm³Typical for Wrought 2000 Series AluminiumMechanicalPropertyValueConditionRelated StandardsCommentBending Fatigue Strength90.0 MPaT61AA StandardsElastic modulus70.0 - 73.0 GPaTypical for Wrought 2000 Series AluminiumHardness, Brinell115.0 [